模具设计外文翻译---模具的发展

毕业设计论文外文翻译

模具的发展

1模具在工业生产中的地位

模具是大批量生产同形产品的工具，是工业生产的主要工艺装备。

采用模具生产零部件，具有生产效率高、质量好、成本低、节约能源和原材料等一系列优点，用模具生产制件所具备的高精度、高复杂程度、高一致性、高生产率和低消耗，是其他加工制造方法所不能比拟的。已成为当代工业生产的重要手段和工艺发展方向。现代经济的基础工业。现代工业品的发展和技术水平的提高，很大程度上取决于模具工业的发展水平，因此模具工业对国民经济和社会发展将起越来越大的作用。1989年3月国务院颁布的《关于当前产业政策要点的决定》中，把模具列为机械工业技术改造序列的第一位、生产和基本建设序列的第二位(仅次于大型发电设备及相应的输变电设备)，确立模具工业在国民经济中的重要地位。1997年以来，又相继把模具及其加工技术和设备列入了《当前国家重点鼓励发展的产业、产品和技术目录》和《鼓励外商投资产业目录》。经国务院批准，从1997年到2000年，对80多家国有专业模具厂实行增值税返还70%的优惠政策，以扶植模具工业的发展。所有这些，都充分体现了国务院和国家有关部门对发展模具工业的重视和支持。目前全世界模具年产值约为600亿美元，日、美等工业发达国家的模具工业产值已超过机床工业，从1997年开始，我国模具工业产值也超过了机床工业产值。

据统计，在家电、玩具等轻工行业，近90％的零件是综筷具生产的；在飞机、汽车、农机和无线电行业，这个比例也超过60％。例如飞机制造业，某型战斗机模具使用量超过三万套，其中主机八千套、发动机二千套、辅机二万套。从产值看，80年代以来，美、日等工业发达国家模具行业的产值已超过机床行业，并又有继续增长的趋势。据国际生产技术协会预测，到2000年，产品尽件粗加工的75%、精加工的50％将由模具完成；金属、塑料、陶瓷、橡胶、建材等工业制品大部分将由模具完成，50％以上的金属板材、80％以上的塑料都特通过模具转化成制品。

2模具的历史发展

模具的出现可以追溯到几千年前的陶器和青铜器铸造，但其大规模使用却是随着现代工业的掘起而发展起来的。

19世纪，随着军火工业(枪炮的弹壳)、钟表工业、无线电工业的发展，冲模得到广泛使用。二次大战后，随着世界经济的飞速发展，它又成了大量生产家用电器、汽车、电子仪器、照相机、钟表等零件的最佳方式。从世界范围看，当时美国的冲压技术走在前列——许多模具先进技术，如简易模具、高效率模具、高寿命模具和冲压自动化技术，大多起源于美国；而瑞士的精冲、德国的冷挤压技术，苏联对塑性加工的研究也处于世界先进行列。50年代，模具行业工作重点是根据订户的要求，制作能满足产品要求的模具。模具设计多凭经验，参考已有图纸和感性认识，对所设计模具零件的机能缺乏真切了解。从1955年到1965年，是压力加工的探索和开发时代——对模具主要零部件的机能和受力状态进行了数学分桥，并把这些知识不断应用于现场实际，使得冲压技术在各方面有飞跃的发展。其结果是归纳出模具设计原则，并使得压力机械、冲压材料、加工方法、梅具结构、模具材料、模具制造方法、自动化装置等领域面貌一新，并向实用化的方向推进，从而使冲压加工从仪能生产优良产品的第一阶段。

进入70年代向高速化、启动化、精密化、安全化发展的第二阶段。在这个过程中不断涌现各种高效率、商寿命、高精度助多功能自动校具。其代表是多达别多个工位的级进模和十几个工位的多工位传递模。在此基础上又发展出既有连续冲压工位又有多滑块成形工位的压力机—弯曲机。在此期间，日本站到了世界最前列——其模具加工精度进入了微米级，模具寿命，合金工具钢制造的模具达到了几千万次，硬质合金钢制造的模具达到了几亿次p每分钟冲压次数，小型压力机通常为200至300次，最高为1200次至1500次。在此期间，为了适应产品更新快、用期短(如汽车改型、玩具翻新等)的需要，各种经济型模具，如锌落合金模具、聚氨酯橡胶模具、钢皮冲模等也得到了很大发展。

从70年代中期至今可以说是计算机辅助设计、辅助制造技术不断发展的时代。随着模具加工精度与复杂性不断提高，生产周期不断加快，模具业对设备和人员素质的要求也不断提高。依靠普通加工设备，凭经验和手艺越来越不能满足模具生产的需要。90年代以来，机械技术和电子技术紧密结合，发展了NC机床，如数控线

切割机床、数控电火花机床、数控铣床、数控坐标磨床等。而采用电子计算机自动编程、控制的CNC机床提高了数控机床的使用效率和范围。近年来又发展出由一台计算机以分时的方式直接管理和控制一群数控机床的NNC系统。

随着计算机技术的发展，计算机也逐步进入模具生产的各个领域，包括设计、制造、管理等。国际生产研究协会预测，到2000年，作为设计和制造之间联系手段的图纸将失去其主要作用。模具自动设计的最根本点是必须确立模具零件标准及设计标准。要摆脱过去以人的思考判断和实际经验为中心所组成的设计方法，就必须把过去的经验和思考方法，进行系列化、数值化、数式化，作为设计准则储存到计算机中。因为模具构成元件也干差万别，要搞出一个能适应各种零件的设计软件几乎不可能。但是有些产品的零件形状变化不大，模具结构有一定的规律，放可总结归纳，为自动设计提供软件。如日本某公司的CDM系统用于级进模设计与制造，其中包括零件图形输入、毛坯展开、条料排样、确定模板尺寸和标准、绘制装配图和零件图、输出NC程序(为数控加工中心和线切割编程)等，所用时间由手工的20%、工时减少到35小时；从80年代初日本就将三维的CAD／CAM系统用于汽车覆盖件模具。目前，在实体件的扫描输入，图线和数据输入，几何造形、显示、绘图、标注以及对数据的自动编程，产生效控机床控制系统的后置处理文件等方面已达到较高水平；计算机仿真(CAE)技术也取得了一定成果。在高层次上，CAD／CAM／CAE集成的，即数据是统一的，可以互相直接传输信息．实现网络化。目前．国外仅有少数厂家能够做到。

3我国模具工业现状及发展趋势

由于历史原因形成的封闭式、“大而全”的企业特征，我国大部分企业均设有模具车间，处于本厂的配套地位，自70年代末才有了模具工业化和生产专业化这个概念。生产效率不高，经济效益较差。模具行业的生产小而散乱，跨行业、投资密集，专业化、商品化和技术管理水平都比较低。

据不完全统计，全国现有模具专业生产厂、产品厂配套的模具车间（分厂）近17000家，约60万从业人员，年模具总产值达200亿元人民币。但是，我国模具工业现有能力只能满足需求量的60％左右，还不能适应国民经济发展的需要。目前，国内需要的大型、精密、复杂和长寿命的模具还主要依靠进口。据海关统计，1997年进口模具价值6.3亿美元，这还不包括随设备一起进口的模具；1997年出口模具仅为7800万美元。目前我国模具工业的技术水平和制造能力，是我国国民经济建设中的薄弱环节和制约经济持续发展的瓶颈。

3.1 模具工业产品结构的现状

按照中国模具工业协会的划分，我国模具基本分为10大类，其中，冲压模和塑料成型模两大类占主要部分。按产值计算，目前我国冲压模占50％左右，塑料成形模约占20％，拉丝模（工具）约占10％，而世界上发达工业国家和地区的塑料成形模比例一般占全部模具产值的40％以上。

我国冲压模大多为简单模、单工序模和符合模等，精冲模，精密多工位级进模还为数不多，模具平均寿命不足100万次，模具最高寿命达到1亿次以上，精度达到3～5um，有50个以上的级进工位，与国际上最高模具寿命6亿次，平均模具寿命5000万次相比，处于80年代中期国际先进水平。

我国的塑料成形模具设计，制作技术起步较晚，整体水平还较低。目前单型腔，简单型腔的模具达70％以上，仍占主导地位。一模多腔精密复杂的塑料注射模，多色塑料注射模已经能初步设计和制造。模具平均寿命约为80万次左右，主要差距是模具零件变形大、溢边毛刺大、表面质量差、模具型腔冲蚀和腐蚀严重、模具排气不畅和型腔易损等，注射模精度已达到5um以下，最高寿命已突破2000万次，型腔数量已超过100腔，达到了80年代中期至90年代初期的国际先进水平。

3.2 模具工业技术结构现状

我国模具工业目前技术水平参差不齐，悬殊较大。从总体上来讲，与发达工业国家及港台地区先进水平相比，还有较大的差距。

在采用CAD/CAM/CAE/CAPP等技术设计与制造模具方面，无论是应用的广泛性，还是技术水平上都存在很大的差距。在应用CAD技术设计模具方面，仅有约10%的模具在设计中采用了CAD，距抛开绘图板还有漫长的一段路要走；在应用CAE进行模具方案设计和分析计算方面，也才刚刚起步，大多还处于试用和动画游戏阶段；在应用CAM技术制造模具方面，一是缺乏先进适用的制造装备，二是现有的工艺设备（包括近10多年来引进的先进设备）或因计算机制式（IBM微机及其兼容机、HP工作站等）不同，或因字节差异、运算速度差异、抗电磁干扰能力差异等，联网率较低，只有5%左右的模具制造设备近年来才开展这项工作；在应用CAPP技术进行工艺规划方面，基本上处于空白状态，需要进行大量的标准化基础工作；在模具共性工艺技术，如模具快速成型技术、抛光技术、电铸成型技术、表面处理技术等方面的CAD/CAM技术应用在我国才刚起步。计算机辅助技术的软件开发，尚处于较低水平，需要知识和经验的积累。我国大部分模具厂、车间的模具加工设备陈旧，在役期长、精度差、效率低，至今仍在使用普通的锻、车、铣、刨、钻、磨设备加工模具，热处理加工仍在使用盐浴、箱式炉，操作凭工人的经验，设备简陋，能耗高。设备更新速度缓慢，技术改造，技术进步力度不大。虽然近年来也引进了不少先进的模具加工设备，但过于分散，或不配套，利用率一般仅有25%左右，设备的一些先进功能也未能得到充分发挥。

缺乏技术素质较高的模具设计、制造工艺技术人员和技术工人，尤其缺乏知识面宽、知识结构层次高的复合型人才。中国模具行业中的技术人员，只占从业人员的8%~12%左右，且技术人员和技术工人的总体技术水平也较低。1980年以前从业的技术人员和技术工人知识老化，知识结构不能适应现在的需要；而80年代以后从业的人员，专业知识、经验匮乏，动手能力差，不安心，不愿学技术。近年来人才外流不仅造成人才数量与素质水平下降，而且人才结构也出现了新的断层，青黄不接，使得模具设计、制造的技术水平难以提高。

3.3 模具工业配套材料，标准件结构现状

近10多年来，特别是“八五”以来，国家有关部委已多次组织有关材料研究所、大专院校和钢铁企业，研究和开发模具专用系列钢种、模具专用硬质合金及其他模具加工的专用工具、辅助材料等，并有所推广。但因材料的质量不够稳定，缺乏必要的试验条件和试验数据，规格品种较少，大型模具和特种模具所需的钢材及规格还有缺口。在钢材供应上，解决用户的零星用量与钢厂的批量生产的供需矛盾，尚未得到有效的解决。另外，国外模具钢材近年来相继在国内建立了销售网点，但因渠道不畅、技术服务支撑薄弱及价格偏高、外汇结算制度等因素的影响，目前推广应用不多。

模具加工的辅助材料和专用技术近年来虽有所推广应用，但未形成成熟的生产技术，大多仍还处于试验摸索阶段，如模具表面涂层技术、模具表面热处理技术、模具导向副润滑技术、模具型腔传感技术及润滑技术、模具去应力技术、模具抗疲劳及防腐技术等尚未完全形成生产力，走向商品化。一些关键、重要的技术也还缺少知识产权的保护。

我国的模具标准件生产，80年代初才形成小规模生产，模具标准化程度及标准件的使用覆盖面约占20%，从市场上能配到的也只有约30个品种，且仅限于中小规格。标准凸凹模、热流道元件等刚刚开始供应，模架及零件生产供应渠道不畅，精度和质量也较差。

3.4 模具工业产业组织结构现状

我国的模具工业相对较落后，至今仍不能称其为一个独立的行业。我国目前的模具生产企业可划分为四大类：专业模具厂，专业生产外供模具；产品厂的模具分厂或车间，以供给本产品厂所需的模具为主要任务；三资企业的模具分厂，其组织模式与专业模具厂相类似，以小而专为主；乡镇模具企业，与专业模具厂相类似。其中以第一类数量最多，模具产量约占总产量的70%以上。我国的模具行业管理体制分散。目前有19个大行业部门制造和使用模具，没有统一管理的部门。仅靠中国模具工业协会统筹规划，集中攻关，跨行业，跨部门管理困难很多。

模具适宜于中小型企业组织生产，而我国技术改造投资向大中型企业倾斜时，中小型模具企业的投资得不到保证。包括产品厂的模具车间、分厂在内，技术改造后不能很快收回其投资，甚至负债累累，影响发展。

虽然大多数产品厂的模具车间、分厂技术力量强，设备条件较好，生产的模具水平也较高，但设备利用率低。

我国模具价格长期以来同其价值不协调，造成模具行业“自身经济效益小，社会效益大”的现象。“干模具的不如干模具标准件的，干标准件的不如干模具带件生产的。干带件生产的不如用模具加工产品的”之类不正常现象存在。

4模具的发展趋势

4.1 模具CAD/CAE/CAM正向集成化、三维化、智能化和网络化方向发展

（1）模具软件功能集成化

模具软件功能的集成化要求软件的功能模块比较齐全，同时各功能模块采用同一数据模型，以实现信息的综合管理与共享，从而支持模具设计、制造、装配、检验、测试及生产管理的全过程，达到实现最佳效益的目的。如英国Delcam公司的系列化软件就包括了曲面/实体几何造型、复杂形体工程制图、工业设计高级渲染、塑料模设计专家系统、复杂形体CAM、艺术造型及雕刻自动编程系统、逆向工程系统及复杂形体在线测量系统等。集成化程度较高的软件还包括：Pro/ENGINEER、UG和CATIA等。国内有上海交通大学金属塑性成型有限元分析系统和冲裁模CAD/CAM系统；北京北航海尔软件有限公司的CAXA系列软件；吉林金网格模具工程研究中心的冲压模CAD/CAE/CAM系统等。

（2）模具设计、分析及制造的三维化

传统的二维模具结构设计已越来越不适应现代化生产和集成化技术要求。模具设计、分析、制造的三维化、无纸化要求新一代模具软件以立体的、直观的感觉来设计模具，所采用的三维数字化模型能方便地用于产品结构的CAE分析、模具可制造性评价和数控加工、成形过程模拟及信息的管理与共享。如Pro/ENGINEER、UG和CATIA等软件具备参数化、基于特征、全相关等特点，从而使模具并行工程成为可能。另外，Cimatran公司的Moldexpert，Delcam公司的Ps-mold及日立造船的Space-E/mold均是3D专业注塑模设计软件，可进行交互式3D型腔、型芯设计、模架配置及典型结构设计。澳大利亚Moldflow公司的三维真实感流动模拟软件MoldflowAdvisers已经受到用户广泛的好评和应用。国内有华中理工大学研制的同类软件HSC3D4.5F及郑州工业大学的Z-mold软件。面向制造、基于知识的智能化

功能是衡量模具软件先进性和实用性的重要标志之一。如Cimatron公司的注塑模专家软件能根据脱模方向自动产生分型线和分型面，生成与制品相对应的型芯和型腔，实现模架零件的全相关，自动产生材料明细表和供NC加工的钻孔表格，并能进行智能化加工参数设定、加工结果校验等。

（3）模具软件应用的网络化趋势

随着模具在企业竞争、合作、生产和管理等方面的全球化、国际化，以及计算机软硬件技术的迅速发展，网络使得在模具行业应用虚拟设计、敏捷制造技术既有必要，也有可能。美国在其《21世纪制造企业战略》中指出，到2006年要实现汽车工业敏捷生产/虚拟工程方案，使汽车开发周期从40个月缩短到4个月。

4.2 模具检测、加工设备向精密、高效和多功能方向发展

（1）模具检测设备的日益精密、高效

精密、复杂、大型模具的发展，对检测设备的要求越来越高。现在精密模具的精度已达2～3μm，目前国内厂家使用较多的有意大利、美国、日本等国的高精度三坐标测量机，并具有数字化扫描功能。如东风汽车模具厂不仅拥有意大利产3250mm×3250mm三坐标测量机，还拥有数码摄影光学扫描仪，率先在国内采用数码摄影、光学扫描作为空间三维信息的获得手段，从而实现了从测量实物→建立数学模型→输出工程图纸→模具制造全过程，成功实现了逆向工程技术的开发和应用。这方面的设备还包括：英国雷尼绍公司第二代高速扫描仪(CYCLON SERIES2)可实现激光测头和接触式测头优势互补，激光扫描精度为0.05mm，接触式测头扫描精度达0.02mm。另外德国GOM公司的ATOS便携式扫描仪，日本罗兰公司的PIX-30、PIX-4台式扫描仪和英国泰勒·霍普森公司TALYSCAN150多传感三维扫描仪分别具有高速化、廉价化和功能复合化等特点。

（2）数控电火花加工机床

日本沙迪克公司采用直线电机伺服驱动的AQ325L、AQ550LLS-WEDM具有驱动反应快、传动及定位精度高、热变形小等优点。瑞士夏米尔公司的NCEDM具有

P-E3自适应控制、PCE能量控制及自动编程专家系统。另外有些EDM还采用了混粉加工工艺、微精加工脉冲电源及模糊控制(FC)等技术。

（3）高速铣削机床(HSM)

铣削加工是型腔模具加工的重要手段。而高速铣削具有工件温升低、切削力小、加工平稳、加工质量好、加工效率高(为普通铣削加工的5～10倍)及可加工硬材料(<60HRC)等诸多优点。因而在模具加工中日益受到重视。瑞士克朗公司UCP710型五轴联动加工中心，其机床定位精度可达8μm，自制的具有矢量闭环控制电主轴，最大转速为42000r/min。意大利RAMBAUDI公司的高速铣床，其加工范围达2500mm×5000mm×1800mm，转速达20500r/min，切削进给速度达20m/min。HSM 一般主要用于大、中型模具加工，如汽车覆盖件模具、压铸模、大型塑料等曲面加工，其曲面加工精度可达0.01mm。

4.3 快速经济制模技术

缩短产品开发周期是赢得市场竞争的有效手段之一。与传统模具加工技术相比，快速经济制模技术具有制模周期短、成本较低的特点，精度和寿命又能满足生产需求，是综合经济效益比较显著的模具制造技术，具体主要有以下一些技术。

(1)快速原型制造技术(RPM)。它包括激光立体光刻技术(SLA) ；叠层轮廓制造技术(LOM) ；激光粉末选区烧结成形技术(SLS) ；熔融沉积成形技术(FDM) 和三维印刷成形技术(3D-P)等。

(2)表面成形制模技术。它是指利用喷涂、电铸和化学腐蚀等新的工艺方法形成型腔表面及精细花纹的一种工艺技术。

(3)浇铸成形制模技术。主要有铋锡合金制模技术、锌基合金制模技术、树脂复合成形模具技术及硅橡胶制模技术等。

(4)冷挤压及超塑成形制模技术。

(5)无模多点成形技术。

(6)KEVRON钢带冲裁落料制模技术。

(7)模具毛坯快速制造技术。主要有干砂实型铸造、负压实型铸造、树脂砂实型铸造

及失蜡精铸等技术。

(8)其他方面技术。如采用氮气弹簧压边、卸料、快速换模技术、冲压单元组合技术、刃口堆焊技术及实型铸造冲模刃口镶块技术等。

4.4 模具材料及表面处理技术发展迅速

模具工业要上水平，材料应用是关键。因选材和用材不当，致使模具过早失效，大约占失效模具的45%以上。在模具材料方面，常用冷作模具钢有CrWMn、Cr12、Cr12MoV和W6Mo5Cr4V2，火焰淬火钢(如日本的AUX2、SX105V(7CrSiMnMoV)等；常用新型热作模具钢有美国H13、瑞典QRO80M、QRO90SUPREME等；常用塑料模具用钢有预硬钢(如美国P20)、时效硬化型钢(如美国P21、日本NAK55等)、热处理硬化型钢(如美国D2，日本PD613、PD555、瑞典一胜白136等)、粉末模具钢(如日本KAD18和KAS440)等；覆盖件拉延模常用HT300、QT60-2、Mo-Cr、Mo-V铸铁等，大型模架用HT250。多工位精密冲模常采用钢结硬质合金及硬质合金YG20等。在模具表面处理方面，其主要趋势是：由渗入单一元素向多元素共渗、复合渗(如TD法)发展；由一般扩散向CVD、PVD、PCVD、离子渗入、离子注入等方向发展；可采用的镀膜有：TiC、TiN、TiCN、TiAlN、CrN、Cr7C3、W2C等，同时热处理手段由大气热处理向真空热处理发展。另外，目前对激光强化、辉光离子氮化技术及电镀(刷镀)防腐强化等技术也日益受到重视。

4.5 模具工业新工艺、新理念和新模式逐步得到了认同

在成形工艺方面，主要有冲压模具功能复合化、超塑性成形、塑性精密成形技术、塑料模气体辅助注射技术及热流道技术、高压注射成形技术等。另一方面，随着先进制造技术的不断发展和模具行业整体水平的提高，在模具行业出现了一些新的设计、生产、管理理念与模式。具体主要有：适应模具单件生产特点的柔性制造技术；创造最佳管理和效益的团队精神，精益生产；提高快速应变能力的并行工程、虚拟制造及全球敏捷制造、网络制造等新的生产哲理；广泛采用标准件通用件的分工协作生产模式；适应可持续发展和环保要求的绿色设计与制造等。

总结

总结进入21世纪，在经济全球化的新形势下，随着资本、技术和劳动力市场的重新整合，我国装备制造业在加入WTO以后，将成为世界装备制造业的基地。而在现代制造业中，无论哪一行业的工程装备，都越来越多地采用由模具工业提供的产品。为了适应用户对模具制造的高精度、短交货期、低成本的迫切要求，模具工业正广泛应用现代先进制造技术来加速模具工业的技术进步，满足各行各业对模具这一基础工艺装备的迫切需求。

Die history

1 Die position in industrial production

Mold is a high-volume products with the shape tool, is the main process of industrial production equipment.

With mold components, with high efficiency, good quality, low cost, saving energy and raw materials and a series of advantages, with the mold workpieces possess high accuracy, high complexity, high consistency, high productivity and low consumption , other manufacturing methods can not match. Have already become an important means of industrial production and technological development. The basis of the modern industrial economy.

The development of modern industrial and technological level depends largely on the level of industrial development die, so die industry to national economic and social development will play an increasing role. March 1989 the State Council promulgated

"on the current industrial policy decision points" in the mold as the machinery industry transformation sequence of the first, production and capital construction of the second sequence (after the large-scale power generation equipment and the corresponding power transmission equipment), establish tooling industry in an important position in the national economy. Since 1997, they have to mold and its processing technology and equipment included in the "current national focus on encouraging the development of industries, products and technologies catalog" and "to encourage foreign investment industry directory." Approved by the State Council, from 1997 to 2000, more than 80 professional mold factory owned 70% VAT refund of preferential policies to support mold industry. All these have fully demonstrated the development of the State Council and state departments tooling industry attention and support. Mold around the world about the current annual output of 60 billion U.S. dollars, Japan, the United States and other industrialized countries die of industrial output value of more than machine tool industry, beginning in 1997, China's industrial output value has exceeded the mold machine tool industry output.

According to statistics, home appliances, toys and other light industries, nearly 90% of the parts are integrated with production of chopsticks; in aircraft, automobiles, agricultural machinery and radio industries, the proportion exceeded 60%. Such as aircraft manufacturing, the use of a certain type of fighter dies more than 30,000 units, of which the host 8000 sets, 2000 sets of engines, auxiliary 20 000 sets. From the output of view, since the 80's, the United States, Japan and other industrialized countries die industry output value has exceeded the machine tool industry, and there are still rising. Production technology, according to the International Association predicts that in 2000, the product best pieces of rough 75%, 50% will be finished mold completed; metals, plastics, ceramics, rubber, building materials and other industrial products, most of the mold will be completed in more than 50% metal plates, more than 80% of all plastic products, especially through the mold into.

2 The historical development of mold

The emergence of mold can be traced back thousands of years ago, pottery and bronze foundry, but the large-scale use is with the rise of modern industry and developed.

The 19th century, with the arms industry (gun's shell), watch industry, radio industry, dies are widely used. After World War II, with the rapid development of world economy, it became a mass production of household appliances, automobiles, electronic equipment, cameras, watches and other parts the best way. From a global perspective, when the United States in the forefront of stamping technology - many die of advanced technologies, such as simple mold, high efficiency, mold, die and stamping the high life automation, mostly originated in the United States; and Switzerland, fine blanking, cold in Germany extrusion technology, plastic processing of the Soviet Union are at the world advanced. 50's, mold industry focus is based on subscriber demand, production can meet the product requirements of the mold. Multi-die design rule of thumb, reference

has been drawing and perceptual knowledge, on the design of mold parts of a lack of real understanding of function. From 1955 to 1965, is the pressure processing of exploration and development of the times - the main components of the mold and the stress state of the function of a mathematical sub-bridge, and to continue to apply to on-site practical knowledge to make stamping technology in all aspects of a leap in development. The result is summarized mold design principles, and makes the pressure machine, stamping materials, processing methods, plum with a structure, mold materials, mold manufacturing method, the field of automation devices, a new look to the practical direction of advance, so that pressing processing apparatus capable of producing quality products from the first stage.

Into the 70's to high speed, launch technology, precision, security, development of the second stage. Continue to emerge in this process a variety of high efficiency, business life, high-precision multi-functional automatic school to help with. Represented by the number of working places as much as other progressive die and dozens of multi-station transfer station module. On this basis, has developed both a continuous pressing station there are more slide forming station of the press - bending machine. In the meantime, the Japanese stand to the world's largest - the mold into the micron-level precision, die life, alloy tool steel mold has reached tens of millions of times, carbide steel mold to each of hundreds of millions of times p minutes for stamping the number of small presses usually 200 to 300, up to 1200 times to 1500 times. In the meantime, in order to meet product updates quickly, with the short duration (such as cars modified, refurbished toys, etc.) need a variety of economic-type mold, such as zinc alloy die down, polyurethane rubber mold, die steel skin, also has been very great development.

From the mid-70s so far can be said that computer-aided design, supporting the continuous development of manufacturing technology of the times. With the precision and complexity of mold rising, accelerating the production cycle, the mold industry, the quality of equipment and personnel are required to improve. Rely on common processing equipment, their experience and skills can not meet the needs of mold. Since the 90's, mechanical and electronic technologies in close connection with the

development of NC machine tools, such as CNC wire cutting machine, CNC EDM, CNC milling, CNC coordinate grinding machine and so on. The use of computer automatic programming, control CNC machine tools to improve the efficiency in the use and scope. In recent years, has developed a computer to time-sharing by the way a group of direct management and control of CNC machine tools NNC system.

With the development of computer technology, computers have gradually into the mold in all areas, including design, manufacturing and management. International Association for the Study of production forecasts to 2000, as a means of links between design and manufacturing drawings will lose its primary role. Automatic Design of die most fundamental point is to establish the mold standard and design standards. To get rid of the people of the past, and practical experience to judge the composition of the design center, we must take past experiences and ways of thinking, for series, numerical value, the number of type-based, as the design criteria to the computer store. Components are dry because of mold constitutes a million other differences, to come up with a can adapt to various parts of the design software almost impossible. But some products do not change the shape of parts, mold structure has certain rules, can be summed up for the automatic design of software. If a Japanese company's CDM system for progressive die design and manufacturing, including the importation of parts of the figure, rough start, strip layout, determine the size and standard templates, assembly drawing and parts, the output NC program (for CNC machining Center and line cutting program), etc., used in 20% of the time by hand, reduce their working hours to 35 hours; from Japan in the early 80s will be three-dimensional cad / cam system for automotive panel die. Currently, the physical parts scanning input, map lines and data input, geometric form, display, graphics, annotations and the data is automatically programmed, resulting in effective control machine tool control system of post-processing documents have reached a high level; computer Simulation (CAE) technology has made some achievements. At high levels, CAD / CAM / CAE integration, that data is integrated, can transmit information directly with each other. Achieve network. Present. Only a few foreign manufacturers can do it.

3 China's mold industry and its development trend

Die & Mould Industry Status

Due to historical reasons for the formation of closed, "big and complete" enterprise features, most enterprises in China are equipped with mold workshop, in factory matching status since the late 70s have a mold the concept of industrialization and specialization of production. Production efficiency is not high, poor economic returns. Mold production industry is small and scattered, cross-industry, capital-intensive, professional, commercial and technical management level are relatively low.

According to incomplete statistics, there are now specialized in manufacturing mold, the product supporting mold factory workshop (factory) near 17 000, about 600 000 employees, annual output value reached 20 billion yuan mold. However, the existing capacity of the mold and die industry can only meet the demand of 60%, still can not meet the needs of national economic development. At present, the domestic needs of

large, sophisticated, complex and long life of the mold also rely mainly on imports. According to customs statistics, in 1997 630 million U.S. dollars worth of imports mold, not including the import of mold together with the equipment; in 1997 only 78 million U.S. dollars export mold. At present the technological level of China Die & Mould Industry and manufacturing capacity, China's national economy in the weak links and bottlenecks constraining sustainable economic development.

3.1 Research on the Structure of industrial products mold

In accordance with the division of China Mould Industry Association, China mold is divided into 10 basic categories, which, stamping die and plastic molding two categories accounted for the main part. Calculated by output, present, China accounts for about 50% die stamping, plastic molding die about 20%, Wire Drawing Die (Tool) about 10% of the world's advanced industrial countries and regions, the proportion of plastic forming die die general of the total output value 40%.

Most of our stamping die mold for the simple, single-process mode and meet the molds, precision die, precision multi-position progressive die is also one of the few, die less than 100 million times the average life of the mold reached 100 million times the maximum life of more than accuracy 3 ~ 5um, more than 50 progressive station, and the international life of the die 600 million times the highest average life of the die 50 million times compared to the mid 80s at the international advanced level.

China's plastic molding mold design, production technology started relatively late, the overall level of low. Currently a single cavity, a simple mold cavity 70%, and still dominant. A sophisticated multi-cavity mold plastic injection mold, plastic injection mold has been able to multi-color preliminary design and manufacturing. Mould is about 80 million times the average life span is about, the main difference is the large deformation of mold components, excess burr side of a large, poor surface quality, erosion and corrosion serious mold cavity, the mold cavity exhaust poor and vulnerable such as, injection mold 5um accuracy has reached below the highest life expectancy has

exceeded 20 million times, the number has more than 100 chamber cavity, reaching the mid 80s to early 90s the international advanced level.

3.2 mold Present Status of Technology

Technical level of China's mold industry currently uneven, with wide disparities. Generally speaking, with the developed industrial countries, Hong Kong and Taiwan advanced level, there is a large gap.

The use of CAD / CAM / CAE / CAPP and other technical design and manufacture molds, both wide application, or technical level, there is a big gap between both. In the application of CAD technology design molds, only about 10% of the mold used in the design of CAD, aside from drawing board still has a long way to go; in the application of CAE design and analysis of mold calculation, it was just started, most of the game is still in trial stages and animation; in the application of CAM technology manufacturing molds, first, the lack of advanced manufacturing equipment, and second, the existing process equipment (including the last 10 years the introduction of advanced equipment) or computer standard (IBM PC and compatibles, HP workstations, etc.) different, or because of differences in bytes, processing speed differences, differences in resistance to electromagnetic interference, networking is low, only about 5% of the mold manufacturing equipment of recent work in this task; in the application process planning CAPP technology, basically a blank state, based on the need for a lot of standardization work; in the mold common technology, such as mold rapid prototyping technology, polishing, electroforming technologies, surface treatment technology aspects of CAD / CAM technology in China has just started. Computer-aided technology, software development, is still at low level, the accumulation of knowledge and experience required. Most of our mold factory, mold processing equipment shop old, long in the length of civilian service, accuracy, low efficiency, still use the ordinary forging, turning, milling, planing, drilling, grinding and processing equipment, mold, heat treatment is still in use salt bath, box-type furnace, operating with the experience of workers, poorly equipped, high energy consumption. Renewal of equipment is slow, technological

工业设计专业英语英文翻译

工业设计原著选读 优秀的产品设计 第一个拨号电话1897年由卡罗耳Gantz 第一个拨号电话在1897年被自动电器公司引入，成立于1891年布朗强，一名勘萨斯州承担者。在1889年，相信铃声“中央交换”将转移来电给竞争对手，强发明了被拨号系统控制的自动交换机系统。这个系统在1892年第一次在拉波特完成史端乔系统中被安装。1897年，强的模型电话，然而模型扶轮拨条的位置没有类似于轮齿约170度,以及边缘拨阀瓣。电话，当然是被亚历山大格雷厄姆贝尔（1847—1922）在1876年发明的。第一个商业交换始建于1878（12个使用者），在1879年，多交换机系统由工程师勒罗伊B 菲尔曼发明,使电话取得商业成功,用户在1890年达到250000。 直到1894年，贝尔原批专利过期，贝尔电话公司在市场上有一个虚拟的垄断。他们已经成功侵权投诉反对至少600竞争者。该公司曾在1896年，刚刚在中央交易所推出了电源的“普通电池”制度。在那之前，一个人有手摇电话以提供足够的电力呼叫。一个连接可能仍然只能在给予该人的名义下提出要求达到一个电话接线员。这是强改变的原因。 强很快成为贝尔的强大竞争者。他在1901年引进了一个桌面拨号模型，这个模型在设计方面比贝尔的模型更加清晰。在1902年，他引进了一个带有磁盘拨号的墙面电话，这次与实际指孔，仍然只有170度左右在磁盘周围。到1905年，一个“长距离”手指孔已经被增加了。最后一个强的知名模型是在1907年。强的专利大概过期于1914年，之后他或他的公司再也没有听到过。直到1919年贝尔引进了拨号系统。当他们这样做，在拨号盘的周围手指孔被充分扩展了。 强发明的拨号系统直到1922年进入像纽约一样的大城市才成为主流。但是一旦作为规规范被确立，直到70年代它仍然是主要的电话技术。后按键式拨号在1963年被推出之后，强发明的最初的手指拨号系统作为“旋转的拨号系统”而知名。这是强怎样“让你的手指拨号”的。 埃姆斯椅LCW和DCW 1947 这些带有复合曲线座位，靠背和橡胶防震装置的成型胶合板椅是由查尔斯埃姆斯设计，在赫曼米勒家具公司生产的。 这个原始的概念是被查尔斯埃姆斯（1907—1978）和埃罗沙里宁（1910—1961）在1940年合作构想出来的。在1937年，埃姆斯成为克兰布鲁克学院实验设计部门的领头人，和沙里宁一起工作调查材料和家具。在这些努力下，埃姆斯发明了分成薄片和成型胶合板夹板，被称作埃姆斯夹板，在1941年收到了来自美国海军5000人的订单。查尔斯和他的妻子雷在他们威尼斯，钙的工作室及工厂和埃文斯产品公司的生产厂家一起生产了这批订单。 在1941年现代艺术博物馆，艾略特诺伊斯组织了一场比赛用以发现对现代生活富有想象力的设计师。奖项颁发给了埃姆斯和沙里宁他们的椅子和存储碎片，由包括埃德加考夫曼，大都会艺术博物馆的阿尔弗雷德，艾略特诺伊斯，马尔塞布鲁尔，弗兰克帕里什和建筑师爱德华达雷尔斯通的陪审团裁决。 这些椅子在1946年的现代艺术展览博物馆被展出，查尔斯埃姆斯设计的新的家具。当时，椅子只有三条腿，稳定性问题气馁了大规模生产。 早期的LCW（低木椅）和DWC（就餐木椅）设计有四条木腿在1946年第一次被埃文斯产品公司（埃姆斯的战时雇主）生产出来，被赫曼米勒家具公司分配。这些工具1946年被乔治纳尔逊为赫曼米勒购买，在1949年接手制造权。后来金属脚的愿景在1951年制作，包括LCW（低金属椅）和DWC（就餐金属椅）模型。配套的餐饮和咖啡桌也产生。这条线一直

模具毕业设计外文翻译(英文+译文)

Injection Molding The basic concept of injection molding revolves around the ability of a thermoplastic material to be softened by heat and to harden when cooled .In most operations ,granular material (the plastic resin) is fed into one end of the cylinder (usually through a feeding device known as a hopper ),heated, and softened(plasticized or plasticized),forced out the other end of the cylinder, while it is still in the form of a melt, through a nozzle into a relatively cool mold held closed under pressure.Here,the melt cools and hardens until fully set-up. The mold is then opened, the piece ejected, and the sequence repeated. Thus, the significant elements of an injection molding machine become: 1) the way in which the melt is plasticized (softened) and forced into the mold (called the injection unit); 2) the system for opening the mold and closing it under pressure (called the clamping unit);3) the type of mold used;4) the machine controls. The part of an injection-molding machine, which converts a plastic material from a sold phase to homogeneous seni-liguid phase by raising its temperature .This unit maintains the material at a present temperature and force it through the injection unit nozzle into a mold .The plunger is a combination of the injection and plasticizing device in which a heating chamber is mounted between the plunger and mold. This chamber heats the plastic material by conduction .The plunger, on each stroke; pushes unbelted plastic material into the chamber, which in turn forces plastic melt at the front of the chamber out through the nozzle The part of an injection molding machine in which the mold is mounted, and which provides the motion and force to open and close the mold and to hold the mold close with force during injection .This unit can also provide other features necessary for the effective functioning of the molding operation .Moving

冲压模具技术外文翻译(含外文文献)

前言 在目前激烈的市场竞争中，产品投入市场的迟早往往是成败的关键。模具是高质量、高效率的产品生产工具，模具开发周期占整个产品开发周期的主要部分。因此客户对模具开发周期要求越来越短，不少客户把模具的交货期放在第一位置，然后才是质量和价格。因此，如何在保证质量、控制成本的前提下加工模具是值得认真考虑的问题。模具加工工艺是一项先进的制造工艺，已成为重要发展方向，在航空航天、汽车、机械等各行业得到越来越广泛的应用。模具加工技术，可以提高制造业的综合效益和竞争力。研究和建立模具工艺数据库，为生产企业提供迫切需要的高速切削加工数据，对推广高速切削加工技术具有非常重要的意义。本文的主要目标就是构建一个冲压模具工艺过程，将模具制造企业在实际生产中结合刀具、工件、机床与企业自身的实际情况积累得高速切削加工实例、工艺参数和经验等数据有选择地存储到高速切削数据库中，不但可以节省大量的人力、物力、财力，而且可以指导高速加工生产实践，达到提高加工效率，降低刀具费用，获得更高的经济效益。 1.冲压的概念、特点及应用 冲压是利用安装在冲压设备（主要是压力机）上的模具对材料施加压力，使其产生分离或塑性变形，从而获得所需零件（俗称冲压或冲压件）的一种压力加工方法。冲压通常是在常温下对材料进行冷变形加工，且主要采用板料来加工成所需零件，所以也叫冷冲压或板料冲压。冲压是材料压力加工或塑性加工的主要方法之一，隶属于材料成型工程术。 冲压所使用的模具称为冲压模具，简称冲模。冲模是将材料（金属或非金属）批量加工成所需冲件的专用工具。冲模在冲压中至关重要，没有符合要求的冲模，批量冲压生产就难以进行；没有先进的冲模，先进的冲压工艺就无法实现。冲压工艺与模具、冲压设备和冲压材料构成冲压加工的三要素，只有它们相互结合才能得出冲压件。 与机械加工及塑性加工的其它方法相比，冲压加工无论在技术方面还是经济方面都具有许多独特的优点，主要表现如下； (1) 冲压加工的生产效率高，且操作方便，易于实现机械化与自动化。这是

工业设计外文翻译

Interaction design Moggridge Bill Interaction design，Page 1-15 USA Art Press, 2008 Interaction design (IxD) is the study of devices with which a user can interact, in particular computer users. The practice typically centers on "embedding information technology into the ambient social complexities of the physical world."[1] It can also apply to other types of non-electronic products and services, and even organizations. Interaction design defines the behavior (the "interaction") of an artifact or system in response to its users. Malcolm McCullough has written, "As a consequence of pervasive computing, interaction design is poised to become one of the main liberal arts of the twenty-first century." Certain basic principles of cognitive psychology provide grounding for interaction design. These include mental models, mapping, interface metaphors, and affordances. Many of these are laid out in Donald Norman's influential book The Psychology of Everyday Things. As technologies are often overly complex for their intended target audience, interaction design aims to minimize the learning curve and to increase accuracy and efficiency of a task without diminishing usefulness. The objective is to reduce frustration and increase user productivity and satisfaction. Interaction design attempts to improve the usability and experience of the product, by first researching and understanding certain users' needs and then designing to meet and exceed them. (Figuring out who needs to use it, and how those people would like to use it.) Only by involving users who will use a product or system on a regular basis will designers be able to properly tailor and maximize usability. Involving real users, designers gain the ability to better understand user goals and experiences. (see also: User-centered design) There are also positive side effects which include enhanced system capability awareness and user ownership. It is important that the user be aware of system capabilities from an early stage so that expectations regarding functionality are both realistic and properly understood. Also, users who have been active participants in a product's development are more likely to feel a sense of ownership, thus increasing overall satisfa. Instructional design is a goal-oriented, user-centric approach to creating training and education software or written materials. Interaction design and instructional design both rely on cognitive psychology theories to focus on how users will interact with software. They both take an in-depth approach to analyzing the user's needs and goals. A needs analysis is often performed in both disciplines. Both, approach the design from the user's perspective. Both, involve gathering feedback from users, and making revisions until the product or service has been found to be effective. (Summative / formative evaluations) In many ways, instructional

模具毕业设计外文翻译7081204

(此文档为word格式，下载后您可任意编辑修改！) 冷冲模具使用寿命的影响及对策 冲压模具概述 冲压模具--在冷冲压加工中，将材料(金属或非金属)加工成零件(或半成品)的一种特殊工艺装备，称为冷冲压模具(俗称冷冲模)。冲压--是在室温下，利用安装在压力机上的模具对材料施加压力，使其产生分离或塑性变形，从而获得所需零件的一种压力加工方法。 冲压模具的形式很多，一般可按以下几个主要特征分类： 1?根据工艺性质分类 (1)冲裁模沿封闭或敞开的轮廓线使材料产生分离的模具。如落料模、冲孔模、切断模、切口模、切边模、剖切模等。 (2)弯曲模使板料毛坯或其他坯料沿着直线(弯曲线)产生弯曲变形，从而获得一定角度和形状的工件的模具。 (3)拉深模是把板料毛坯制成开口空心件，或使空心件进一步改变形状和尺寸的模具。 (4)成形模是将毛坯或半成品工件按图凸、凹模的形状直接复制成形，而材料本身仅产生局部塑性变形的模具。如胀形模、缩口模、扩口模、起伏成形模、翻边模、整形模等。2?根据工序组合程度分类 (1)单工序模在压力机的一次行程中，只完成一道冲压工序的模具。 (2)复合模只有一个工位，在压力机的一次行程中，在同一工位上同时完成两道或两道以上冲压工序的模具。 (3)级进模(也称连续模) 在毛坯的送进方向上，具有两个或更多的工位，在压力机的一次行程中，在不同的工位上逐次完成两道或两道以上冲压工序的模具。 冲冷冲模全称为冷冲压模具。 冷冲压模具是一种应用于模具行业冷冲压模具及其配件所需高性能结构陶瓷材料的制备方法，高性能陶瓷模具及其配件材料由氧化锆、氧化钇粉中加铝、错元素构成，制备工艺是将氧化锆溶液、氧化钇溶液、氧化错溶液、氧化铝溶液按一定比例混合配成母液，滴入碳酸氢铵，采用共沉淀方法合成模具及其配件陶瓷材料所需的原材料，反应生成的沉淀经滤水、干燥，煅烧得到高性能陶瓷模具及其配件材料超微粉，再经过成型、烧结、精加工，便得到高性能陶瓷模具及其配件材料。本发明的优点是本发明制成的冷冲压模具及其配件使用寿命长，在冲压过程中未出现模具及其配件与冲压件产生粘结现象，冲压件表面光滑、无毛刺，完全可以替代传统高速钢、钨钢材料。 冷冲模具主要零件冷冲模具是冲压加工的主要工艺装备，冲压制件就是靠上、下模具的相对运动来完成的。 加工时由于上、下模具之间不断地分合，如果操作工人的手指不断进入或停留在模具闭合区，便会对其人身安全带来严重威胁。 1

机械设计外文翻译(中英文)

机械设计理论 机械设计是一门通过设计新产品或者改进老产品来满足人类需求的应用技术科学。它涉及工程技术的各个领域，主要研究产品的尺寸、形状和详细结构的基本构思，还要研究产品在制造、销售和使用等方面的问题。 进行各种机械设计工作的人员通常被称为设计人员或者机械设计工程师。机械设计是一项创造性的工作。设计工程师不仅在工作上要有创造性，还必须在机械制图、运动学、工程材料、材料力学和机械制造工艺学等方面具有深厚的基础知识。如前所诉，机械设计的目的是生产能够满足人类需求的产品。发明、发现和科技知识本身并不一定能给人类带来好处，只有当它们被应用在产品上才能产生效益。因而，应该认识到在一个特定的产品进行设计之前，必须先确定人们是否需要这种产品。 应当把机械设计看成是机械设计人员运用创造性的才能进行产品设计、系统分析和制定产品的制造工艺学的一个良机。掌握工程基础知识要比熟记一些数据和公式更为重要。仅仅使用数据和公式是不足以在一个好的设计中做出所需的全部决定的。另一方面，应该认真精确的进行所有运算。例如，即使将一个小数点的位置放错，也会使正确的设计变成错误的。 一个好的设计人员应该勇于提出新的想法，而且愿意承担一定的风险，当新的方法不适用时，就使用原来的方法。因此，设计人员必须要有耐心，因为所花费的时间和努力并不能保证带来成功。一个全新的设计，要求屏弃许多陈旧的，为人们所熟知的方法。由于许多人墨守成规，这样做并不是一件容易的事。一位机械设计师应该不断地探索改进现有的产品的方法，在此过程中应该认真选择原有的、经过验证的设计原理，将其与未经过验证的新观念结合起来。 新设计本身会有许多缺陷和未能预料的问题发生，只有当这些缺陷和问题被解决之后，才能体现出新产品的优越性。因此，一个性能优越的产品诞生的同时，也伴随着较高的风险。应该强调的是，如果设计本身不要求采用全新的方法，就没有必要仅仅为了变革的目的而采用新方法。 在设计的初始阶段，应该允许设计人员充分发挥创造性，不受各种约束。即使产生了许多不切实际的想法，也会在设计的早期，即绘制图纸之前被改正掉。只有这样，才不致于堵塞创新的思路。通常，要提出几套设计方案，然后加以比较。很有可能在最后选定的方案中，采用了某些未被接受的方案中的一些想法。

工业设计产品设计中英文对照外文翻译文献

(文档含英文原文和中文翻译) 中英文翻译原文：

DESIGN and ENVIRONMENT Product design is the principal part and kernel of industrial design. Product design gives uses pleasure. A good design can bring hope and create new lifestyle to human. In spscificity,products are only outcomes of factory such as mechanical and electrical products,costume and so on.In generality,anything,whatever it is tangibile or intangible,that can be provided for a market,can be weighed with value by customers, and can satisfy a need or desire,can be entiled as products. Innovative design has come into human life. It makes product looking brand-new and brings new aesthetic feeling and attraction that are different from traditional products. Enterprose tend to renovate idea of product design because of change of consumer's lifestyle , emphasis on individuation and self-expression,market competition and requirement of individuation of product. Product design includes factors of society ,economy, techology and leterae humaniores. Tasks of product design includes styling, color, face processing and selection of material and optimization of human-machine interface. Design is a kind of thinking of lifestyle.Product and design conception can guide human lifestyle . In reverse , lifestyle also manipulates orientation and development of product from thinking layer.

模具专业外文文献最新

济南大学泉城学院 毕业设计外文资料翻译 题目现代快速经济制造模具技术 专业机械制造及其自动化 班级专升本1302班 学生刘计良 学号2013040156 指导教师刘彦 二〇一五年三月十六日

Int J Adv Manuf Technol ,(2011) 53:1–10DOI 10.1007/s00170-010-2796-y Modular design applied to beverage-container injection molds Ming-Shyan Huang & Ming-Kai Hsu Received: 16 March 2010 / Accepted: 15 June 2010 / Published online: 25 June 2010 # Springer-Verlag London Limited 2010 Modular design applied to beverage-container injection molds The Abstract: This work applies modular design concepts to designating beverage-container injection molds. This study aims to develop a method of controlling costs and time in relation to mold development, and also to improve product design. This investigation comprises two parts: functional-ity coding, and establishing a standard operation procedure, specifically designed for beverage-container injection mold design and manufacturing. First, the injection mold is divided into several modules, each with a specific function. Each module is further divided into several structural units possessing sub-function or sub-sub-function. Next, dimen-sions and specifications of each unit are standardized and a compatible interface is constructed linking relevant units. This work employs a cup-shaped beverage container to experimentally assess the performance of the modular design approach. The experimental results indicate that the modular design approach to manufacturing injection molds shortens development time by 36% and reduces costs by 19 23% compared with the conventional ap-proach. Meanwhile, the information on

机械类外文翻译

机械类外文翻译 塑料注塑模具浇口优化 摘要:用单注塑模具浇口位置的优化方法，本文论述。该闸门优化设计的目的是最大限度地减少注塑件翘曲变形，翘曲，是因为对大多数注塑成型质量问题的关键，而这是受了很大的部分浇口位置。特征翘曲定义为最大位移的功能表面到表面的特征描述零件翘曲预测长度比。结合的优化与数值模拟技术，以找出最佳浇口位置，其中模拟armealing算法用于搜索最优。最后，通过实例讨论的文件，它可以得出结论，该方法是有效的。 注塑模具、浇口位臵、优化、特征翘曲变形关键词: 简介 塑料注射成型是一种广泛使用的，但非常复杂的生产的塑料产品，尤其是具有高生产的要求，严密性，以及大量的各种复杂形状的有效方法。质量ofinjection 成型零件是塑料材料，零件几何形状，模具结构和工艺条件的函数。注塑模具的一个最重要的部分主要是以下三个组件集:蛀牙，盖茨和亚军，和冷却系统。拉米夫定、Seow(2000)、金和拉米夫定(2002) 通过改变部分的尼斯达到平衡的腔壁厚度。在平衡型腔充填过程提供了一种均匀分布压力和透射电镜,可以极大地减少高温的翘曲变形的部分～但仅仅是腔平衡的一个重要影响因素的一部分。cially Espe,部分有其功能上的要求,其厚度通常不应该变化。 pointview注塑模具设计的重点是一门的大小和位臵,以及流道系统的大小和布局。大门的大小和转轮布局通常被认定为常量。相对而言,浇口位臵与水口大小布局也更加灵活,可以根据不同的零件的质量。 李和吉姆(姚开屏,1996a)称利用优化流道和尺寸来平衡多流道系统为multiple 注射系统。转轮平衡被形容为入口压力的差异为一多型腔模具用相同的蛀牙,也存

工业设计外文翻译---不需要设计师的设计

Design Without Designers 网站截图： https://www.sodocs.net/doc/1a5399766.html,/baidu?word=%B9%A4%D2%B5%C9%E8%BC%C6%D3%A2%CE%C4%CE%C4%CF%D 7&tn=sogouie_1_dg 原文： Design Without Designers I will always remember my first introduction to the power of good product design. I was newly arrived at Apple, still learning the ways of business, when I was visited by a member of Apple's Industrial Design team. He showed me a foam mockup of a proposed product. "Wow," I said, "I want one! What is it?" That experience brought home the power of design: I was excited and enthusiastic even before I knew what it was. This type of visceral "wow" response requires creative designers. It is subjective, personal. Uh oh, this is not what engineers like to hear. If you can't put a number to it, it's not important. As a result, there is a trend to eliminate designers. Who needs them when we can simply test our way to success? The excitement of powerful, captivating design is defined as irrelevant. Worse, the nature of design is in danger. Don't believe me? Consider Google. In a well-publicized move, a senior designer at Google recently quit, stating that Google had no interest in or understanding of design. Google, it seems, relies primarily upon test results, not human skill or judgment. Want to know whether a design is effective? Try it out. Google can quickly submit samples to millions of people in well-controlled trials, pitting one design against another, selecting the winner based upon number of clicks, or sales, or whatever objective measure they wish. Which color of blue is best? Test. Item placement? Test. Web page layout? Test. This procedure is hardly unique to Google. https://www.sodocs.net/doc/1a5399766.html, has long followed this practice. Years ago I was proudly informed that they no longer have debates about which design is best: they simply test them and use the data to decide. And this, of course, is the approach used by the human-centered iterative design approach: prototype, test, revise. Is this the future of design? Certainly there are many who believe so. This is a hot topic on the talk and seminar circuit. After all, the proponents ask reasonably, who could object to making decisions based upon data? Two Types of Innovation: Incremental Improvements and New Concepts In design—and almost all innovation, for that matter—there are at least two distinct forms. One is

ABS塑件的注射成型工艺分析及模具设计外文翻译

毕业设计（论文）外文资料翻译 学生姓名: 学号: 专业: 指导教师: 学院: 日期:

外文资料翻译要求 一、译文内容须与课题研究或调研内容高度一致。 二、译文翻译得当、语句通顺，不少于4000字。 三、译文格式要求：译文题目（即一级标题）采用小三黑体、二级 标题采用四号黑体、三级标题采用13磅黑体；图题和表题采用五号宋体，外文和符号采用五号Times New Roman；正文采用小四宋体，外文和符号采用小四Times New Roman，行间距为20磅；A4纸双面打印。 四、原文及译文一起装订，顺序依次为封面（背面为外文资料翻译 要求）、译文评阅（单面打印）、译文、外文原文。

译文评阅 评分：___________________（百分制）指导教师（签名）：___________________ 年月日

原文 Treating and the modern mould make high speed One, summarizes 1 the present situation that the mould makes at present and trend The mould is important handicraft equipment , occupies decisive position in industrid departments such as consumer goods , electrical equipment electron , automobile , aircraft fabrication. The mould is important handicraft equipment , occupies decisive position in industrid departments such as consumer goods , electrical equipment electron , automobile , aircraft fabrication. Industrial product part rough process 75%, the finish machining 50% and plastic part 90% will be completed from the mould. The Chinese mould market demand already reaches scale of 500 hundred million yuan at present. The automobile mould , the annual growth rate covering piece of mould especially will exceed 20 %; Also prompt building material mould development , various heterotype material the mould , wall surface and floor mould become new mould growth point , plastic doors and windows and plastic drain-pipe increase to exceeding 30 by in the upcoming several years %; The home appliance mould annual growth rate will exceed 10 %; The IT industry year increases % speed equally exceeding 20 , the need to the mould accounts for 20 of mould marketplace %.2004 annual Chinese machine tools implements industry output value will continue to increase. Our country mould fabrication market potential is enormous. The basis data counts , in recent years, our country mould year gross output value reaches 3 billion U. S. dollar , entrance exceeds 1 billion U. S. dollar, exceed 100 million U. S. dollar outlet. Increase by from 25% to increase to 2005 50% of 1995. The expert foretells that abroad: Asia portion being occupied by in mould fabrication in the whole world, will from 25% to increase to 2005 50% of 1995.

机械图纸中英文翻译汇总

近几年，我厂和英国、西班牙的几个公司有业务往来，外商传真发来的图纸都是英文标注，平时阅看有一定的困难。下面把我们积累的几点看英文图纸的经验与同行们交流。 1标题栏 英文工程图纸的右下边是标题栏（相当于我们的标题栏和部分技术要求），其中有图纸名称（TILE）、设计者（DRAWN）、审查者（CHECKED）、材料（MATERIAL）、日期（DATE）、比例（SCALE）、热处理（HEAT TREATMENT）和其它一些要求，如： 1)TOLERANCES UNLESS OTHERWISE SPECIFIAL 未注公差。 2)DIMS IN mm UNLESS STATED 如不做特殊要求以毫米为单位。 3)ANGULAR TOLERANCE±1°角度公差±1°。 4)DIMS TOLERANCE±0.1未注尺寸公差±0.1。 5)SURFACE FINISH 3.2 UNLESS STATED未注粗糙度3.2。 2常见尺寸的标注及要求 2.1孔（HOLE）如： （1）毛坯孔：3"DIAO+1CORE 芯子3"0+1; （2）加工孔：1"DIA1"; （3）锪孔：锪孔(注C＇BORE=COUNTER BORE锪底面孔); （4）铰孔：1"/4 DIA REAM铰孔1"/4; （5）螺纹孔的标注一般要表示出螺纹的直径，每英寸牙数（螺矩）、螺纹种类、精度等级、钻深、攻深，方向等。如： 例1.6 HOLES EQUI-SPACED ON 5"DIA (6孔均布在5圆周上（EQUI-SPACED=EQUALLY SPACED均布） DRILL 1"DIATHRO＇ 钻1"通孔（THRO＇=THROUGH通） C/SINK22×6DEEP 沉孔22×6 例2.TAP7"/8-14UNF-3BTHRO＇ 攻统一标准细牙螺纹，每英寸14牙，精度等级3B级 （注UNF=UNIFIED FINE THREAD美国标准细牙螺纹） 1"DRILL 1"/4-20 UNC-3 THD7"/8 DEEP 4HOLES NOT BREAK THRO钻 1"孔，攻1"/4美国粗牙螺纹，每英寸20牙，攻深7"/8,4孔不准钻通（UNC=UCIFIED COARSE THREAD 美国标准粗牙螺纹）