外文参考文献(带中文翻译)

外文资料原文

涂敏之会计学 8051208076

Title:

Future of SME finance

（https://www.sodocs.net/doc/aa12116452.html,/docs/pos_papers/2004/041027_SME-finance_final.do c）

Background – the environment for SME finance has changed

Future economic recovery will depend on the possibility of Crafts, Trades and SMEs to exploit their potential for growth and employment creation.

SMEs make a major contribution to growth and employment in the EU and are at the heart of the Lisbon Strategy, whose main objective is to turn Europe into the most competitive and dynamic knowledge-based economy in the world. However, the ability of SMEs to grow depends highly on their potential to invest in restructuring, innovation and qualification. All of these investments need capital and therefore access to finance.

Against this background the consistently repeated complaint of SMEs about their problems regarding access to finance is a highly relevant constraint that endangers the economic recovery of Europe.

Changes in the finance sector influence the behavior of credit institutes towards Crafts, Trades and SMEs. Recent and ongoing developments in the banking sector add to the concerns of SMEs and will further endanger their access to finance. The main changes in the banking sector which influence SME finance are:

?Globalization and internationalization have increased the competition and the profit orientation in the sector;

?worsening of the economic situations in some institutes (burst of the ITC bubble, insolvencies) strengthen the focus on profitability further;

?Mergers and restructuring created larger structures and many local branches, which had direct and personalized contacts with small enterprises, were closed;

?up-coming implementation of new capital adequacy rules (Basel II) will also change SME business of the credit sector and will increase its administrative costs;

?Stricter interpretation of State-Aide Rules by the European Commission eliminates the support of banks by public guarantees; many of the effected banks are very active in SME finance.

All these changes result in a higher sensitivity for risks and profits in the finance sector.

The changes in the finance sector affect the accessibility of SMEs to finance.

Higher risk awareness in the credit sector, a stronger focus on profitability and the ongoing restructuring in the finance sector change the framework for SME finance and influence the accessibility of SMEs to finance. The most important changes are: ?In order to make the higher risk awareness operational, the credit sector introduces new rating systems and instruments for credit scoring;

?Risk assessment of SMEs by banks will force the enterprises to present more and better quality information on their businesses;

?Banks will try to pass through their additional costs for implementing and running the new capital regulations (Basel II) to their business clients;

?due to the increase of competition on interest rates, the bank sector demands more and higher fees for its services (administration of accounts, payments systems, etc.), which are not only additional costs for SMEs but also limit their liquidity;

?Small enterprises will lose their personal relationship with decision-makers in local branches –the credit application process will become more formal and anonymous and will probably lose longer;

?the credit sector will lose more and more its “public function” to provide access to finance for a wide range of economic actors, which it has in a number of countries, in order to support and facilitate economic growth; the profitability of lending becomes the main focus of private credit institutions.

All of these developments will make access to finance for SMEs even more difficult and / or will increase the cost of external finance. Business start-ups and SMEs, which want to enter new markets, may especially suffer from shortages regarding finance. A European Code of Conduct between Banks and SMEs would have allowed at least more transparency in the relations between Banks and SMEs and UEAPME regrets that the bank sector was not able to agree on such a commitment.

Towards an encompassing policy approach to improve the access of Crafts, Trades and SMEs to finance

All analyses show that credits and loans will stay the main source of finance for the SME sector in Europe. Access to finance was always a main concern for SMEs,

but the recent developments in the finance sector worsen the situation even more. Shortage of finance is already a relevant factor, which hinders economic recovery in Europe. Many SMEs are not able to finance their needs for investment.

Therefore, UEAPME expects the new European Commission and the new European Parliament to strengthen their efforts to improve the framework conditions for SME finance. Europe’s Crafts, Trades and SMEs ask for an encompassing policy approach, which includes not only the conditions for SMEs’ access to lending, but will also strengthen their capacity for internal finance and their access to external risk capital.

From UEAPM E’s point of view such an encompassing approach should be based on three guiding principles:

?Risk-sharing between private investors, financial institutes, SMEs and public sector;

?Increase of transparency of SMEs towards their external investors and lenders;

?improving the regulatory environment for SME finance.

Based on these principles and against the background of the changing environment for SME finance, UEAPME proposes policy measures in the following areas:

1. New Capital Requirement Directive: SME friendly implementation of Basel II

Due to intensive lobbying activities, UEAPME, together with other Business Associations in Europe, has achieved some improvements in favour of SMEs regarding the new Basel Agreement on regulatory capital (Basel II). The final agreement from the Basel Committee contains a much more realistic approach toward the real risk situation of SME lending for the finance market and will allow the necessary room for adaptations, which respect the different regional traditions and institutional structures.

However, the new regulatory system will influence the relations between Banks and SMEs and it will depend very much on the way it will be implemented into European law, whether Basel II becomes burdensome for SMEs and if it will reduce access to finance for them.

The new Capital Accord form the Basel Committee gives the financial market authorities and herewith the European Institutions, a lot of flexibility. In about 70

areas they have room to adapt the Accord to their specific needs when implementing it into EU law. Some of them will have important effects on the costs and the accessibility of finance for SMEs.

UEAPME expects therefore from the new European Commission and the new European Parliament:

?The implementation of the new Capital Requirement Directive will be costly for the Finance Sector (up to 30 Billion Euro till 2006) and its clients will have to pay for it. Therefore, the implementation – especially for smaller banks, which are often very active in SME finance –has to be carried out with as little administrative burdensome as possible (reporting obligations, statistics, etc.).

?The European Regulators must recognize traditional instruments for collaterals (guarantees, etc.) as far as possible.

?The European Commission and later the Member States should take over the recommendations from the European Parliament with regard to granularity, access to retail portfolio, maturity, partial use, adaptation of thresholds, etc., which will ease the burden on SME finance.

2. SMEs need transparent rating procedures

Due to higher risk awareness of the finance sector and the needs of Basel II, many SMEs will be confronted for the first time with internal rating procedures or credit scoring systems by their banks. The bank will require more and better quality information from their clients and will assess them in a new way. Both up-coming developments are already causing increasing uncertainty amongst SMEs.

In order to reduce this uncertainty and to allow SMEs to understand the principles of the new risk assessment, UEAPME demands transparent rating procedures –rating procedures may not become a “Black Box” for SMEs:?The bank should communicate the relevant criteria affecting the rating of SMEs.

?The bank should inform SMEs about its assessment in order to allow SMEs to improve.

The negotiations on a European Code of Conduct between Banks and SMEs , which would have included a self-commitment for transparent rating procedures by Banks, failed. Therefore, UEAPME expects from the new European Commission and the new European Parliament support for:

?binding rules in the framework of the new Capital Adequacy Directive, which ensure the transparency of rating procedures and credit scoring systems for SMEs;

?Elaboration of national Codes of Conduct in order to improve the relations between Banks and SMEs and to support the adaptation of SMEs to the new financial environment.

3. SMEs need an extension of credit guarantee systems with a special focus on Micro-Lending

Business start-ups, the transfer of businesses and innovative fast growth SMEs also depended in the past very often on public support to get access to finance. Increasing risk awareness by banks and the stricter interpretation of State Aid Rules will further increase the need for public support.

Already now, there are credit guarantee schemes in many countries on the limit of their capacity and too many investment projects cannot be realized by SMEs.

Experiences show that Public money, spent for supporting credit guarantees systems, is a very efficient instrument and has a much higher multiplying effect than other instruments. One Euro form the European Investment Funds can stimulate 30 Euro investments in SMEs (for venture capital funds the relation is only 1:2).

Therefore, UEAPME expects the new European Commission and the new European Parliament to support:

?The extension of funds for national credit guarantees schemes in the framework of the new Multi-Annual Programmed for Enterprises;

?The development of new instruments for securitizations of SME portfolios;

?The recognition of existing and well functioning credit guarantees schemes as collateral;

?More flexibility within the European Instruments, because of national differences in the situation of SME finance;

?The development of credit guarantees schemes in the new Member States;

?The development of an SBIC-like scheme in the Member States to close the equity gap (0.2 – 2.5 Mio Euro, according to the expert meeting on PACE on April 27 in Luxemburg).

?the development of a financial support scheme to encourage the internalizations of SMEs (currently there is no scheme available at EU level: termination of JOP, fading out of JEV).

4. SMEs need company and income taxation systems, which strengthen their capacity for self-financing

Many EU Member States have company and income taxation systems with negative incentives to build-up capital within the company by re-investing their profits. This is especially true for companies, which have to pay income taxes. Already in the past tax-regimes was one of the reasons for the higher dependence of Europe’s SMEs on bank lending. In future, the result of rating will also depend on the amount of capital in the company; the high dependence on lending will influence the access to lending. This is a vicious cycle, which has to be broken.

Even though company and income taxation falls under the competence of Member States, UEAPME asks the new European Commission and the new European Parliament to publicly support tax-reforms, which will strengthen the capacity of Crafts, Trades and SME for self-financing. Thereby, a special focus on non-corporate companies is needed.

5. Risk Capital – equity financing

External equity financing does not have a real tradition in the SME sector. On the one hand, small enterprises and family business in general have traditionally not been very open towards external equity financing and are not used to informing transparently about their business.

On the other hand, many investors of venture capital and similar forms of equity finance are very reluctant regarding investing their funds in smaller companies, which is more costly than investing bigger amounts in larger companies. Furthermore it is much more difficult to set out of such investments in smaller companies.

Even though equity financing will never become the main source of financing for SMEs, it is an important instrument for highly innovative start-ups and fast growing companies and it has therefore to be further developed. UEAPME sees three pillars for such an approach where policy support is needed:

Availability of venture capital

?The Member States should review their taxation systems in order to create incentives to invest private money in all forms of venture capital.

?Guarantee instruments for equity financing should be further developed.

Improve the conditions for investing venture capital into SMEs

?The development of secondary markets for venture capital investments in SMEs should be supported.

?Accounting Standards for SMEs should be revised in order to ease transparent exchange of information between investor and owner-manager.

Owner-managers must become more aware about the need for transparency towards investors

?SME owners will have to realise that in future access to external finance (venture capital or lending) will depend much more on a transparent and open exchange of information about the situation and the perspectives of their companies.

?In order to fulfil the new needs for transparency, SMEs will have to use new information instruments (business plans, financial reporting, etc.) and new management instruments (risk-management, financial management, etc.).

外文资料翻译

涂敏之会计学 8051208076

题目：未来的中小企业融资

背景：中小企业融资已经改变

未来的经济复苏将取决于能否工艺品，贸易和中小企业利用其潜在的增长和创造就业。

经济增长和就业在欧盟和的核心是里斯本战略，其主要目标是使欧洲成为最有竞争力的和有活力的知识型经济在世界上，中小型企业作出重大贡献。然而，中小型企业能力的增长取决于其潜在的高投资在结构调整，创新和资格，所有这些投资需要资金。

在此背景下的一贯反复投诉的中小企业的问题就在于获得融资，这是一个高度相关的约束，关乎欧洲经济复苏。变化的影响，金融部门的行为，信贷机构对工艺品，贸易和中小企业。

最近和当前的事态发展，银行业添加到中小企业所关注的问题，并会进一步危害其获得资金。主要的变化是影响银行业中小企业融资是：全球化和国际化，增加了竞争和盈利方向的部门;

日益恶化的经济形势在一些机构（爆裂的国贸中心泡沫，破产）加强重点放在盈利能力进一步加强;合并和重组创造更大的结构和许多当地的分支机构，它的直接和个性化的接触，小企业，被关闭; 即将实施新的资本充足规则（巴塞尔II ）也将发生变化的中小企业的信贷业务部门，并会增加其行政费用;严格的解释国家备忘录规则由欧洲委员会消除了银行的支持下，由公共保障;许多影响银行非常积极地参与中小企业融资。所有这些变化导致更高的灵敏度的风险和利润的金融部门。金融业的影响无障碍中小企业得到资金。

高风险的认识，信贷部门，更加注重利润和正在进行的结构调整中的金融部门变化的框架，中小企业融资和影响力的中小企业获得资金。最重要的改变是：为了使风险意识较高的业务，信贷部门引入新的评价制度和手段信用评分;风险评估的中小企业银行将迫使企业提出更多更好的高质量的信息对他们的业务;银行将设法通过其额外费用为实施和运行的新的资本条例（巴塞尔II），以他们的商业客户;由于增加了竞争的利率，银行部门的需求更多，更高的服务费用（管理账户，支付系统等），这不仅为中小企业的额外费用，而且还限制了它们的流动性;小企业将失去他们的个人关系，决策者在地方分支机构-信贷申请过程将变得更加正规和匿名的，可能会失去长远;信贷部门将失去越来越多的“公共职能”，以提供获得资金的范围广泛的经济主体，它已在一些国家，为了支持和促进经济

增长;利润的贷款成为主要重点是私人信贷机构。

所有这些事态发展将使中小企业获得资金的更加困难和/或将增加的成本的外部资金。创业和中小企业，而要进入新的市场，可能是受到资金短缺的问题。欧洲行为守则银行与中小企业之间有至少允许更多的透明度之间的关系银行与中小企业和UEAPME感到遗憾的是，银行部门未能达成这样的承诺。

建立一个包括政策的方法，以提高准入手工业，贸易和中小企业融资所有分析表明，信贷和贷款将保持主要的资金来源为中小企业部门在欧洲。获得资金一直是主要的关注中小企业，但最近的事态发展，金融部门局势恶化甚至更多。资金短缺已经是一个相关因素，阻碍欧洲经济复苏。许多中小企业没有能够资助他们的投资需求。

因此，UEAPME预计新的欧盟委员会和欧洲议会的新加强努力的框架内，以改善中小企业融资条件。欧洲的工艺品，贸易和中小企业的要求，包括政策方针，其中不仅包括条件中小企业获得贷款，而且还将加强其能力的内部融资和获得外部风险资本。

从UEAPME的角度来看，这种无所不包的做法应当基于三项指导原则：风险分担之间的私人投资者，金融机构，中小企业和公共部门;增加了透明度，中小企业对外部投资者和贷款人;改善监管环境，中小企业融资。

基于这些原则，并在这一背景下不断变化的环境，中小企业金融，UEAPME 提出政策措施，在以下几个方面：

1.新的资本要求指令：中小企业友好执行巴塞尔II由于密集的游说活动，UEAPME ，加上其他商业协会欧洲，已经取得了一些有利于改善中小企业的新巴塞尔协议的监管资本（巴塞尔II ）。最后协议由巴塞尔委员会包含一个更现实的态度的真正危险状况的中小企业贷款的金融市场并允许必要的变通余地，这方面，不同区域的传统和体制结构。

然而，新的规管制度，将影响之间的关系银行与中小企业，它在很大程度上将取决于它的道路将实施到欧洲的法律，无论是巴塞尔II成为中小企业的负担，如果将减少获得资金了。

新资本协议的形式巴塞尔委员会给出了金融市场的主管部门和函欧洲机构，有很强的灵活性。在大约70个地区，他们间的协定，以适应其具体需要执行时纳入欧盟法律。其中有些人将产生重要的影响成本和获取资金的中小型企业。

因此，从UEAPME预计新的欧盟委员会和欧洲议会的新实施新的资本要求指令将耗资巨大，金融部门（至多30亿欧元3至2006年）和它的客户将不得不付出代价。因此，执行-特别是对规模较小的银行，往往是非常活跃的中小企业融资-已经进行了小的行政负担可能（提交报告的义务，统计数据等）。

欧洲管理者必须尽可能认识到传统的文书抵押（担保等）。欧洲委员会和后来的各会员国应采取的建议，欧洲议会4方面的粒度，进入零售组合，成熟，局部使用，适应的阈值等，这将减轻市民的负担中小企业融资。

2.中小型企业需要透明的评价程序

由于较高的风险意识，金融部门和需要的巴塞尔II，许多中小型企业将面临第一次与内部评级的程序或信用评分系统的银行。该银行将需要更多和更好的质量信息，并从他们的客户将评估他们以一种新的方式。双方即将事态发展已引起越来越多的中小型企业之间的不确定性。

为了减少这种不确定性，并允许中小企业理解的原则，新的风险评估，UEAPME 要求，透明的评价程序-评价程序可能不会成为一个“黑箱”中小企业：世界银行应当通报有关标准影响评价的中小企业。世界银行应当通知有关中小企业的评估，以便使中小企业改善。

谈判的欧洲行为准则银行与中小企业之间的5日，这将包括一个自我承诺，透明的评价程序，银行，失败了。因此，UEAPME期望新一届欧盟委员会和欧洲议会的新的支持：具有约束力的规则框架中的新资本充足指令，以确保透明度的评价程序和信用评分系统，为中小型企业; 拟订国家行为守则，以改善关系，银行与中小企业，并支持中小企业适应新的金融环境。

3.中小企业需要延长信用担保制度

特别侧重于小额贷款创业，转让和创新的企业快速成长的中小企业也取决于在过去往往对公众的支持，以获得资金。越来越多的银行风险意识和严格的解释国家援助规则将进一步增加，需要公众的支持。现在已经有信贷保证计划在许多国家的限制，他们的能力和太多的投资项目不能得以实现的中小型企业。

经验表明，公共资金，用于支持信用担保体系，是一个非常有效的工具和具有更高的乘数效应比其他文书。1欧元形式的欧洲投资基金可以刺激投资的30欧元的中小型企业（为风险资本基金的关系，仅仅是1:2 ）。

因此，UEAPME预计新的欧盟委员会和欧洲议会的新的支持：延长资金用于国家信贷担保计划的框架内，新的多年度方案的企业;发展新的手段对中小企业的投资组合的证券化;承认现有的和运转良好的信贷担保计划，作为抵押;更灵活的欧洲文书，因为国家的不同情况的中小企业融资;发展的信贷保证计划，在新的会员国;发展一个SBIC类似计划的会员国以关闭公平差距（ 0.2 - 2.5神达欧元，根据专家会议有望在4月27日在卢森堡）。发展了一个财务支持计划，以鼓励中小企业的internalization （目前还没有计划，可在欧盟一级：终止JOP ，淡出乙脑）。

4.中小企业需要的公司所得税制度，加强其能力的自筹资金

许多欧盟成员国的公司和收入的税收制度与消极因素，建立资本在公司内部的再投资的利润。这一点尤其适用于公司，这些公司必须支付所得税。已经在过去的税收制度的原因之一，较高的依赖欧洲的中小型企业对银行贷款的。今后，评价的结果也将取决于资金的公司，高度依赖贷款将影响到获得贷款。这是一个恶性循环，必须打破。

尽管公司和所得税属于会员国的权限，UEAPME要求新一届欧盟委员会和欧洲议会的新的公开支持税收改革，这将加强能力工艺品，贸易和中小企业的自筹资金。因此，特别侧重于非公司企业的需要。

5.风险资本-股权融资

外部股权融资没有一个真正的传统，在中小型企业部门。一方面，小企业和家庭企业在传统上一般并不十分开放实现外部股权融资，而不是用来通知透明其业务。

另一方面，许多投资者的风险资本和类似形式的股权融资方面非常不愿意投资在其资金规模较小的公司，这是更昂贵的投资数额较大的大型企业。此外，它更难以确定这种投资规模较小的公司。

尽管股权融资将永远不会成为主要资金来源为中小型企业，这是一个重要手段高度创新创业和快速成长的公司，因此，它得到进一步的发展。 UEAPME认为，三大支柱的这样一种做法在政策支持需要：

（1）获得风险资本

（2）会员国应审查其税收制度，以鼓励私人资本投资的各种形式的风险资本。（3）保证文书的股权融资应得到进一步发展。

（4）改善有利于风险资本投资到中小企业

（5）发展二级市场，风险资本投资的中小企业应该得到支持。

（6）会计准则对中小企业应加以修订，以缓和透明之间的信息交流的投资者和拥有者，管理者。

业主兼经理必须更加意识到有必要对投资者的透明度，中小型企业的业主必须明白，在未来获得外部融资（风险资本或贷款），将取决于更多的透明和公开的信息交流有关的情况和观点，他们的公司。

为了满足新的需要的透明度，中小企业将必须使用新的信息工具（业务计划，财务报告等）和新的管理手段（风险管理，财务管理等）。

英文论文及中文翻译

International Journal of Minerals, Metallurgy and Materials Volume 17, Number 4, August 2010, Page 500 DOI: 10.1007/s12613-010-0348-y Corresponding author: Zhuan Li E-mail: li_zhuan@https://www.sodocs.net/doc/aa12116452.html, ? University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg 2010 Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction Zhuan Li, Peng Xiao, and Xiang Xiong State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China (Received: 12 August 2009; revised: 28 August 2009; accepted: 2 September 2009) Abstract: Carbon fibre reinforced carbon and silicon carbide dual matrix composites (C/C-SiC) were fabricated by the warm compacted-in situ reaction. The microstructure, mechanical properties, tribological properties, and wear mechanism of C/C-SiC composites at different brake speeds were investigated. The results indicate that the composites are composed of 58wt% C, 37wt% SiC, and 5wt% Si. The density and open porosity are 2.0 g·cm–3 and 10%, respectively. The C/C-SiC brake composites exhibit good mechanical properties. The flexural strength can reach up to 160 MPa, and the impact strength can reach 2.5 kJ·m–2. The C/C-SiC brake composites show excellent tribological performances. The friction coefficient is between 0.57 and 0.67 at the brake speeds from 8 to 24 m·s?1. The brake is stable, and the wear rate is less than 2.02×10?6 cm3·J?1. These results show that the C/C-SiC brake composites are the promising candidates for advanced brake and clutch systems. Keywords: C/C-SiC; ceramic matrix composites; tribological properties; microstructure [This work was financially supported by the National High-Tech Research and Development Program of China (No.2006AA03Z560) and the Graduate Degree Thesis Innovation Foundation of Central South University (No.2008yb019).] 温压-原位反应法制备C / C-SiC刹车复合材料的工艺和性能 李专，肖鹏，熊翔 粉末冶金国家重点实验室，中南大学，湖南长沙410083，中国（收稿日期：2009年8月12日修订：2009年8月28日;接受日期：2009年9月2日） 摘要：采用温压?原位反应法制备炭纤维增强炭和碳化硅双基体(C/C-SiC)复合材

关于力的外文文献翻译、中英文翻译、外文翻译

五、外文资料翻译 Stress and Strain 1.Introduction to Mechanics of Materials Mechanics of materials is a branch of applied mechanics that deals with the behavior of solid bodies subjected to various types of loading. It is a field of study that i s known by a variety of names, including “strength of materials” and “mechanics of deformable bodies”. The solid bodies considered in this book include axially-loaded bars, shafts, beams, and columns, as well as structures that are assemblies of these components. Usually the objective of our analysis will be the determination of the stresses, strains, and deformations produced by the loads; if these quantities can be found for all values of load up to the failure load, then we will have obtained a complete picture of the mechanics behavior of the body. Theoretical analyses and experimental results have equally important roles in the study of mechanics of materials . On many occasion we will make logical derivations to obtain formulas and equations for predicting mechanics behavior, but at the same time we must recognize that these formulas cannot be used in a realistic way unless certain properties of the been made in the laboratory. Also , many problems of importance in engineering cannot be handled efficiently by theoretical means, and experimental measurements become a practical necessity. The historical development of mechanics of materials is a fascinating blend of both theory and experiment, with experiments pointing the way to useful results in some instances and with theory doing so in others①. Such famous men as Leonardo da Vinci(1452-1519) and Galileo Galilei (1564-1642) made experiments to adequate to determine the strength of wires , bars , and beams , although they did not develop any adequate theo ries (by today’s standards ) to explain their test results . By contrast , the famous mathematician Leonhard Euler(1707-1783) developed the mathematical theory any of columns and calculated the critical load of a column in 1744 , long before any experimental evidence existed to show the significance of his results ②. Thus , Euler’s theoretical results remained unused for many years, although today they form the basis of column theory. The importance of combining theoretical derivations with experimentally determined properties of materials will be evident theoretical derivations with experimentally determined properties of materials will be evident as we proceed with

平面设计中英文对照外文翻译文献

(文档含英文原文和中文翻译) 中英文翻译 平面设计 任何时期平面设计可以参照一些艺术和专业学科侧重于视觉传达和介绍。采用多种方式相结合，创造和符号，图像和语句创建一个代表性的想法和信息。平面设计师可以使用印刷，视觉艺术和排版技术产生的最终结果。平面设计常常提到的进程，其中沟通是创造和产品设计。 共同使用的平面设计包括杂志，广告，产品包装和网页设计。例如，可能包括产品包装的标志或其他艺术作品，举办文字和纯粹的设计元素，如形状和颜色统一件。组成的一个最重要的特点，尤其是平面设计在使用前现有材料或不同的元素。 平面设计涵盖了人类历史上诸多领域，在此漫长的历史和在相对最近爆炸视觉传达中的第20和21世纪，人们有时是模糊的区别和重叠的广告艺术，平面设计和美术。毕竟，他们有着许多相同的内容，理论，原则，做法和语言，有时同样的客人或客户。广告艺术的最终目标是出售的商品和服务。在平面

设计，“其实质是使以信息，形成以思想，言论和感觉的经验”。 在唐朝（ 618-906 ）之间的第4和第7世纪的木块被切断打印纺织品和后重现佛典。阿藏印在868是已知最早的印刷书籍。 在19世纪后期欧洲，尤其是在英国，平面设计开始以独立的运动从美术中分离出来。蒙德里安称为父亲的图形设计。他是一个很好的艺术家，但是他在现代广告中利用现代电网系统在广告、印刷和网络布局网格。 于1849年，在大不列颠亨利科尔成为的主要力量之一在设计教育界，该国政府通告设计在杂志设计和制造的重要性。他组织了大型的展览作为庆祝现代工业技术和维多利亚式的设计。 从1892年至1896年威廉?莫里斯凯尔姆斯科特出版社出版的书籍的一些最重要的平面设计产品和工艺美术运动，并提出了一个非常赚钱的商机就是出版伟大文本论的图书并以高价出售给富人。莫里斯证明了市场的存在使平面设计在他们自己拥有的权利，并帮助开拓者从生产和美术分离设计。这历史相对论是，然而，重要的，因为它为第一次重大的反应对于十九世纪的陈旧的平面设计。莫里斯的工作，以及与其他私营新闻运动，直接影响新艺术风格和间接负责20世纪初非专业性平面设计的事态发展。 谁创造了最初的“平面设计”似乎存在争议。这被归因于英国的设计师和大学教授Richard Guyatt，但另一消息来源于20世纪初美国图书设计师William Addison Dwiggins。 伦敦地铁的标志设计是爱德华约翰斯顿于1916年设计的一个经典的现代而且使用了系统字体设计。 在20世纪20年代，苏联的建构主义应用于“智能生产”在不同领域的生产。个性化的运动艺术在俄罗斯大革命是没有价值的，从而走向以创造物体的功利为目的。他们设计的建筑、剧院集、海报、面料、服装、家具、徽标、菜单等。 Jan Tschichold 在他的1928年书中编纂了新的现代印刷原则，他后来否认他在这本书的法西斯主义哲学主张，但它仍然是非常有影响力。 Tschichold ，包豪斯印刷专家如赫伯特拜耳和拉斯洛莫霍伊一纳吉，和El Lissitzky 是平面设计之父都被我们今天所知。 他们首创的生产技术和文体设备，主要用于整个二十世纪。随后的几年看到平面设计在现代风格获得广泛的接受和应用。第二次世界大战结束后，美国经济的建立更需要平面设计，主要是广告和包装等。移居国外的德国包豪斯设计学院于1937年到芝加哥带来了“大规模生产”极简到美国;引发野火的“现代”建筑和设计。值得注意的名称世纪中叶现代设计包括阿德里安Frutiger ，设计师和Frutiger字体大学;保兰德，从20世纪30年代后期，直到他去世于1996年，采取的原则和适用包豪斯他们受欢迎的广告和标志设计，帮助创造一个独特的办法，美国的欧洲简约而成为一个主要的先驱。平面设计称为企业形象;约瑟夫米勒，罗克曼，设计的海报严重尚未获取1950年代和1960年代时代典型。 从道路标志到技术图表，从备忘录到参考手册，增强了平面设计的知识转让。可读性增强了文字的视觉效果。 设计还可以通过理念或有效的视觉传播帮助销售产品。将它应用到产品和公司识别系统的要素像标志、颜色和文字。连同这些被定义为品牌。品牌已日益成为重要的提供的服务范围，许多平面设计师，企业形象和条件往往是同时交替使用。

中英文参考文献格式

中文参考文献格式 参考文献（即引文出处）的类型以单字母方式标识： M——专著，C——论文集，N——报纸文章，J——期刊文章，D——学位论文，R——报告，S——标准，P——专利；对于不属于上述的文献类型，采用字母“Z”标识。 参考文献一律置于文末。其格式为： （一）专著 示例 [1] 张志建.严复思想研究[M]. 桂林：广西师范大学出版社，1989. [2] 马克思恩格斯全集：第1卷[M]. 北京：人民出版社，1956. [3] [英]蔼理士.性心理学[M]. 潘光旦译注.北京：商务印书馆，1997. （二）论文集 示例 [1] 伍蠡甫.西方文论选[C]. 上海：上海译文出版社，1979. [2] 别林斯基.论俄国中篇小说和果戈里君的中篇小说[A]. 伍蠡甫.西方文论选：下册[C]. 上海：上海译文出版社，1979. 凡引专著的页码，加圆括号置于文中序号之后。 （三）报纸文章 示例 [1] 李大伦.经济全球化的重要性[N]. 光明日报，1998-12-27，（3） （四）期刊文章 示例 [1] 郭英德.元明文学史观散论[J]. 北京师范大学学报（社会科学版），1995（3）. （五）学位论文 示例 [1] 刘伟.汉字不同视觉识别方式的理论和实证研究[D]. 北京：北京师范大学心理系，1998. （六）报告 示例 [1] 白秀水，刘敢，任保平. 西安金融、人才、技术三大要素市场培育与发展研究[R]. 西安：陕西师范大学西北经济发展研究中心，1998. （七）、对论文正文中某一特定内容的进一步解释或补充说明性的注释，置于本页地脚，前面用圈码标识。 参考文献的类型 根据GB3469-83《文献类型与文献载体代码》规定，以单字母标识： M——专著（含古籍中的史、志论著） C——论文集 N——报纸文章 J——期刊文章 D——学位论文 R——研究报告 S——标准 P——专利 A——专著、论文集中的析出文献 Z——其他未说明的文献类型 电子文献类型以双字母作为标识： DB——数据库 CP——计算机程序 EB——电子公告

计算机专业外文文献及翻译

微软Visual Studio 1微软Visual Studio Visual Studio 是微软公司推出的开发环境，Visual Studio可以用来创建Windows平台下的Windows应用程序和网络应用程序，也可以用来创建网络服务、智能设备应用程序和Office 插件。Visual Studio是一个来自微软的集成开发环境IDE，它可以用来开发由微软视窗，视窗手机，Windows CE、.NET框架、.NET精简框架和微软的Silverlight支持的控制台和图形用户界面的应用程序以及Windows窗体应用程序，网站，Web应用程序和网络服务中的本地代码连同托管代码。 Visual Studio包含一个由智能感知和代码重构支持的代码编辑器。集成的调试工作既作为一个源代码级调试器又可以作为一台机器级调试器。其他内置工具包括一个窗体设计的GUI应用程序，网页设计师，类设计师，数据库架构设计师。它有几乎各个层面的插件增强功能，包括增加对支持源代码控制系统（如Subversion和Visual SourceSafe）并添加新的工具集设计和可视化编辑器，如特定于域的语言或用于其他方面的软件开发生命周期的工具（例如Team Foundation Server的客户端：团队资源管理器）。 Visual Studio支持不同的编程语言的服务方式的语言，它允许代码编辑器和调试器（在不同程度上）支持几乎所有的编程语言，提供了一个语言特定服务的存在。内置的语言中包括C/C + +中（通过Visual C++）,https://www.sodocs.net/doc/aa12116452.html,（通过Visual https://www.sodocs.net/doc/aa12116452.html,），C＃中（通过Visual C＃）和F＃（作为Visual Studio 2010），为支持其他语言，如M,Python,和Ruby等，可通过安装单独的语言服务。它也支持的 XML/XSLT,HTML/XHTML ,JavaScript和CSS.为特定用户提供服务的Visual Studio也是存在的：微软Visual Basic，Visual J＃、Visual C＃和Visual C++。 微软提供了“直通车”的Visual Studio 2010组件的Visual Basic和Visual C＃和Visual C + +，和Visual Web Developer版本，不需任何费用。Visual Studio 2010、2008年和2005专业版，以及Visual Studio 2005的特定语言版本（Visual Basic、C++、C＃、J＃），通过微软的下载DreamSpark计划，对学生免费。 2架构 Visual Studio不支持任何编程语言，解决方案或工具本质。相反，它允许插入各种功能。特定的功能是作为一个VS压缩包的代码。安装时，这个功能可以从服务器得到。IDE提供三项服务：SVsSolution，它提供了能够列举的项目和解决方案; SVsUIShell，它提供了窗口和用户界面功能（包括标签，工具栏和工具窗口）和SVsShell，它处理VS压缩包的注册。此外，IDE还可以负责协调和服务之间实现通信。所有的编辑器，设计器，项目类型和其他工具都是VS压缩包存在。Visual Studio 使用COM访问VSPackage。在Visual Studio SDK中还包括了管理软件包框架(MPF)，这是一套管理的允许在写的CLI兼容的语言的任何围绕COM的接口。然而，MPF并不提供所有的Visual Studio COM 功能。

英文文献及中文翻译

毕业设计说明书 英文文献及中文翻译 学院：专 2011年6月 电子与计算机科学技术软件工程

https://www.sodocs.net/doc/aa12116452.html, Overview https://www.sodocs.net/doc/aa12116452.html, is a unified Web development model that includes the services necessary for you to build enterprise-class Web applications with a minimum of https://www.sodocs.net/doc/aa12116452.html, is part of https://www.sodocs.net/doc/aa12116452.html, Framework,and when coding https://www.sodocs.net/doc/aa12116452.html, applications you have access to classes in https://www.sodocs.net/doc/aa12116452.html, Framework.You can code your applications in any language compatible with the common language runtime(CLR), including Microsoft Visual Basic and C#.These languages enable you to develop https://www.sodocs.net/doc/aa12116452.html, applications that benefit from the common language runtime,type safety, inheritance,and so on. If you want to try https://www.sodocs.net/doc/aa12116452.html,,you can install Visual Web Developer Express using the Microsoft Web Platform Installer,which is a free tool that makes it simple to download,install,and service components of the Microsoft Web Platform.These components include Visual Web Developer Express,Internet Information Services (IIS),SQL Server Express,and https://www.sodocs.net/doc/aa12116452.html, Framework.All of these are tools that you use to create https://www.sodocs.net/doc/aa12116452.html, Web applications.You can also use the Microsoft Web Platform Installer to install open-source https://www.sodocs.net/doc/aa12116452.html, and PHP Web applications. Visual Web Developer Visual Web Developer is a full-featured development environment for creating https://www.sodocs.net/doc/aa12116452.html, Web applications.Visual Web Developer provides an ideal environment in which to build Web sites and then publish them to a hosting https://www.sodocs.net/doc/aa12116452.html,ing the development tools in Visual Web Developer,you can develop https://www.sodocs.net/doc/aa12116452.html, Web pages on your own computer.Visual Web Developer includes a local Web server that provides all the features you need to test and debug https://www.sodocs.net/doc/aa12116452.html, Web pages,without requiring Internet Information Services(IIS)to be installed. Visual Web Developer provides an ideal environment in which to build Web sites and then publish them to a hosting https://www.sodocs.net/doc/aa12116452.html,ing the development tools in Visual Web Developer,you can develop https://www.sodocs.net/doc/aa12116452.html, Web pages on your own computer.

10kV小区供配电英文文献及中文翻译

在广州甚至广东的住宅小区电气设计中,一般都会涉及到小区的高低压供配电系统的设计.如10kV高压配电系统图,低压配电系统图等等图纸一大堆.然而在真正实施过程中,供电部门(尤其是供电公司指定的所谓电力设计小公司)根本将这些图纸作为一回事,按其电脑里原有的电子档图纸将数据稍作改动以及断路器按其所好换个厂家名称便美其名曰设计(可笑不?),拿出来的图纸根本无法满足电气设计的设计意图,致使严重存在以下问题:(也不知道是职业道德问题还是根本一窍不通) 1.跟原设计的电气系统货不对板,存在与低压开关柜后出线回路严重冲突,对实际施工造成严重阻碍,经常要求设计单位改动原有电气系统图才能满足它的要求(垄断的没话说). 2.对消防负荷和非消防负荷的供电(主要在高层建筑里)应严格分回路(从母线段)都不清楚,将消防负荷和非消防负荷按一个回路出线(尤其是将电梯和消防电梯,地下室的动力合在一起等等,有的甚至将楼顶消防风机和梯间照明合在一个回路,以一个表计量). 3.系统接地保护接地型式由原设计的TN-S系统竟曲解成"TN-S-C-S"系统(室内的还需要做TN-C,好玩吧?),严格的按照所谓的"三相四线制"再做重复接地来实施,导致后续施工中存在重复浪费资源以及安全隐患等等问题.. ............................(违反建筑电气设计规范等等问题实在不好意思一一例举,给那帮人留点混饭吃的面子算了) 总之吧,在通过图纸审查后的电气设计图纸在这帮人的眼里根本不知何物,经常是完工后的高低压供配电系统已是面目全非了,能有百分之五十的保留已经是谢天谢地了. 所以.我觉得:住宅建筑电气设计,让供电部门走!大不了留点位置,让他供几个必需回路的电,爱怎么折腾让他自个怎么折腾去.. Guangzhou, Guangdong, even in the electrical design of residential quarters, generally involving high-low cell power supply system design. 10kV power distribution systems, such as maps, drawings, etc. low-voltage distribution system map a lot. But in the real implementation of the process, the power sector (especially the so-called power supply design company appointed a small company) did these drawings for one thing, according to computer drawings of the original electronic file data to make a little change, and circuit breakers by their the name of another manufacturer will be sounding good design (ridiculously?), drawing out the design simply can not meet the electrical design intent, resulting in a serious following problems: (do not know or not know nothing about ethical issues) 1. With the original design of the electrical system not meeting board, the existence and low voltage switchgear circuit after qualifying serious conflicts seriously hinder the actual construction, often require changes to the original design unit plans to meet its electrical system requirements (monopoly impress ). 2. On the fire load and fire load of non-supply (mainly in high-rise building in) should be strictly sub-loop (from the bus segment) are not clear, the fire load and fire load of non-qualifying press of a circuit (especially the elevator and fire elevator, basement, etc.

外文参考文献下载

外文原文 Introduction to Java autor：Martin Ngobye. source：Computing Static Slice for Java Programs Java is designed to meet the challenges of application development in the context of heterogeneous, network-wide distributed environments. Paramount among these challenges is secure delivery of applications that consume the minimum of system resources, can run on any hardware and software platform, and can be extended dynamically. Java originated as part of a research project to develop advanced software for a wide variety of network devices and embedded systems. The goal was to develop a small, reliable, portable, distributed, real-time operating platform. When the project started, C++ was the language of choice. But over time the difficulties encountered with C++ grew to the point where the problems could best be addressed by creating an entirely new language platform. Design and architecture decisions drew from a variety of languages such as Eiffel, SmallTalk, Objective C, and Cedar/Mesa. The result is a language platform that has proven ideal for developing secure, distributed, network based end-user applications in environments ranging from network-embedded devices to the World-Wide Web and the desktop. The design requirements of Java are driven by the nature of the computing environments in which software must be deployed. The massive growth of the Internet and the World-Wide Web leads us to a completely new way of looking at development and distribution of software. To live in the world of electronic commerce and distribution, Java must enable the development of secure, high performance, and highly robust applications on multiple platforms in heterogeneous, distributed networks. Operating on multiple platforms in heterogeneous networks invalidates the traditional schemes of binary distribution, release, upgrade, patch, and so on. To survive in this jungle, Java must be architecture neutral, portable, and dynamically adaptable. The Java system that emerged to meet these needs is simple, so it can be easily programmed by most developers; familiar, so that current developers can easily learn

中文和英文简历和专业英语材料翻译

韶关学院 期末考核报告 科目：专业英语 学生姓名： 学号： 同组人： 院系： 专业班级： 考核时间：2012年10月9日—2012年11月1 日评阅教师： 评分：

第1章英文阅读材料翻译 (1) 第2章中文摘要翻译英文 (3) 第3章中文简历和英文简历 (4) 第4章课程学习体会和建议 (6) 参考文献 (7)

第1章英文阅读材料翻译 Mechanization and Automation Processes of mechanization have been developing and becoming more complex ever since the beginning of the Industrial Revolution at the end of the 18th century. The current developments of automatic processes are, however, different from the old ones. The “automation” of the 20th century is distinct from the mechanization of the 18th and 19th centuries inasmuch as mechanization was applied to individual operations, wherea s “automation” is concerned with the operation and control of a complete producing unit. And in many, though not all, instances the element of control is so great that whereas mechanization displaces muscle, “automation”displaces brain as well. The distinction between the mechanization of the past and what is happening now is, however, not a sharp one. At one extreme we have the electronic computer with its quite remarkable capacity for discrimination and control, while at the other end of the scale are “ transfer machines” , as they are now called, which may be as simple as a conveyor belt to another. An automatic mechanism is one which has a capacity for self-regulation; that is, it can regulate or control the system or process without the need for constant human attention or adjustment. Now people often talk about “feedback” as begin an essential factor of the new industrial techniques, upon which is base an automatic self-regulating system and by virtue of which any deviation in the system from desired condition can be detected, measured, reported and corrected. when “feedback” is applied to the process by which a large digital computer runs at the immense speed through a long series of sums, constantly rejecting the answers until it finds one to fit a complex set of facts which have been put to it, it is perhaps different in degree from what we have previously been accustomed to machines. But “feedback”, as such, is a familiar mechanical conception. The old-fashioned steam engine was fitted with a centrifugal governor, two balls on levers spinning round and round an upright shaft. If the steam pressure rose and the engine started to go too fast, the increased speed of the spinning governor caused it to rise up the vertical rod and shut down a valve. This cut off some of the steam and thus the engine brought itself back to its proper speed. The mechanization, which was introduced with the Industrial Revolution, because it was limited to individual processes, required the employment of human labor to control each machine as well as to load and unload materials and transfer them from one place to another. Only in a few instances were processes automatically linked together and was production organized as a continuous flow. In general, however, although modern industry has been highly mechanized ever since the 1920s, the mechanized parts have not as a rule been linked together. Electric-light bulbs, bottles and the components of innumerable mass-produced

英文文献及中文翻译撰写格式

关于毕业设计说明书（论文）英文文献及中文翻译撰写格式 为提高我校毕业生毕业设计说明书（毕业论文）的撰写质量，做到毕业设计说明书（毕业论文）在内容和格式上的统一和规范，特规定如下: 一、装订顺序 论文（设计说明书）英文文献及中文翻译内容一般应由3个部分组成，严格按以下顺序装订。 1、封面 2、中文翻译 3、英文文献（原文） 二、书写格式要求 1、毕业设计（论文）英文文献及中文翻译分毕业设计说明书英文文献及中文翻译和毕业论文英文文献及中文翻译两种，所有出现相关字样之处请根据具体情况选择“毕业设计说明书” 或“毕业论文”字样。 2、毕业设计说明书（毕业论文）英文文献及中文翻译中的中文翻译用Word 软件编辑，英文文献用原文，一律打印在A4幅面白纸上，单面打印。 3、毕业设计说明书（毕业论文）英文文献及中文翻译的上边距:30mm；下边距:25mm；左边距:3Omm；右边距:2Omm；行间距1.5倍行距。 4、中文翻译页眉的文字为“中北大学2019届毕业设计说明书” 或“中北大学××××届毕业论文”，用小四号黑体字，页眉线的上边距为25mm；页脚的下边距为18mm。 5、中文翻译正文用小四号宋体，每章的大标题用小三号黑体，加粗，留出上下间距为：段前0.5行，段后0.5行；二级标题用小四号黑体，加粗；其余小标题用小四号黑体，不加粗。 6、文中的图、表、附注、公式一律采用阿拉伯数字分章编号。如图1.2，表2.3，附注3.2或式4.3。 7、图表应认真设计和绘制,不得徒手勾画。表格与插图中的文字一律用5号宋体。

每一插图和表格应有明确简短的图表名，图名置于图之下，表名置于表之上，图表号与图表名之间空一格。插图和表格应安排在正文中第一次提及该图表的文字的下方。当插图或表格不能安排在该页时，应安排在该页的下一页。 图表居中放置，表尽量采用三线表。每个表应尽量放在一页内，如有困难，要加“续表X.X”字样，并有标题栏。 图、表中若有附注时，附注各项的序号一律用阿拉伯数字加圆括号顺序排，如:注①。附注写在图、表的下方。 文中公式的编号用圆括号括起写在右边行末顶格，其间不加虚线。 8、文中所用的物理量和单位及符号一律采用国家标准，可参见国家标准《量和单位》(GB3100~3102-93)。 9、文中章节编号可参照《中华人民共和国国家标准文献著录总则》。